User manual SIEMENS C28

[. . . ] Emergency numbers cannot be dialled if the keypad lock (page 2) is activated!Not all of the functions described in this manual are available in all countries. Gigaset C28 / English / A31008-A200-xxxx-x-xx19 /Kentucky 2 Setting up the telephone for use Step 1: Connecting the base Opening the battery cover Push the point show in the picture and lift it. 1 2 W Connect the phone jack with the phone cord 1 and the mains units (220 V) with the power cord 2 as shown. If you ever purchase another phone cord from a store, ensure that the phone conductors are correctly connected: 3-4 connection of the telephone conductors/EURO CTR37. Place the battery leads in the cable guides so that the battery cover cannot catch on the leads and damage them when it is closed. never use a normal battery pack as this could damage your health and cause injury. [. . . ] Long press (back to idle status). a Muting You can mute your handset when making external calls. To cancel the function: Press a briefly. Table for text/numerical entry: see page 6. Cursor control: see page 1. Speed dialling Example: the stored name is "3Anna" Press key I long ¢c to dial this number Dialling with the directory h ~ s c Open the directory. Press the talk key. Gigaset C28 / English / A31008-A200-xxxx-x-xx19 /Ke ntucky 4 Last number redial list This list contains the five last dialled numbers. The following functions are available: Calling back a caller from the calls list: Û Select an entry c. ¢ ¢ ¢ Registering and de-registering handsets EDIT ENTRY SEND TO DIR Add/edit number and use to dial Store number in directory Clear the list: Þ ¢MENU¢L ¢OK. A Gigaset C28 handset that is not yet registered on a base is registered automatically. Other handsets must be registered manually. Dialling a number You can select a number from the last number redial list: Þ Select an entry c. Automatic registering: Gigaset handset C28 Any Gigaset C28 handset that is not registered to a base can be registered automatically. To register a handset for the first time, place it in the base with the display facing forward. Registering takes about 1 minute; a number of icons flash in the display. The handset is automatically assigned the next available internal number (1­4). This number appears in the top left of the display after successful registering, e. g. four handsets have been registered), handset number 4 is de-registered and overwritten. ¢ Calls list/Select services list Press the display key Û to open the caller list and select services list (see Menu Tree, page 8). When the phone is in idle status, new missed calls are indicated by a flashing Û . Example of how the calls list appears: C LOG 05/10 Number of old, read entries Number of new entries Manual registering: Gigaset handset 1. On the handset: MENU REGISTER HS enter your system PIN (default is 0000) OK. of entering the system PIN, press the register/paging key on the front of the base (page 1) and hold for approx. The registration process starts. Opening the calls list and selecting an entry You can view entries you have already read. ¢ ¢ ¢ Û s C LOG 05/10 OK Open calls list. Select entry. s Manual registering: Other handsets Other handsets are registered as follows: 1. On the handset: Start to register your handset as described in its operating instructions. On the base: Press the register/paging key on the front of the base (page 1) for approx. 10 sec. The registration process starts. Û Select an entry (see above)¢ MENU. The following functions are available: Delete an individual number Store a number in the directory. [. . . ] This can cause static! The table below contains a list of common problems and possible solutions. Problem Cause Solution Nothing The handset is not Press the end call key a for approx. Move the handset The handset is No wireless connection to outside the range closer to the base. correctly Contact with liquid ! If the handset has come into contact with liquid: 1 Switch the handset off and remove the battery pack immediately. [. . . ]