User manual SIEMENS S58

[. . . ] Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / overview. fm / 16. 09. 2005 Handset at a glance Handset at a glance 1 16 INT 1 05. 07. 19 V 09:45 2 } 3 15 14 13 12 4 5 11 10 9 8 6 7 1 Display (screen) in idle status 2 Battery charge condition = e V U (flat to full) = flashes: battery almost flat e V U flashes: battery charging 3 Display keys (page 9) 4 Message key Access to calls and lists; Flashes: new call. 5 End call key, On/Off key End call, cancel function, go back one menu level (press briefly), back to idle status (press and hold), activate/deactivate handset (press and hold in idle status) 6 Hash key Keypad lock on/off (press and hold) 7 Quick dial list key Open quick dial list 8 Connection socket for headset 9 Microphone 10 R key Insert a dial pause (press and hold) 11 Star key Ringtones on/off (press and hold), Toggle between upper/lower case and digits 12 IP key Preconfigered IP number 13 Talk key Answer a call, open last number redial list (press briefly), start dialling (press and hold) 14 Handsfree key Switch between earpiece and handsfree mode; Lights up: handsfree activated; Flashes: incoming call, automatic last number redial 15 Control key (page 8) 16 Signal strength i (high to low) | flashes: no reception 1 Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / S440_laender_IVZ. fm / 16. 09. 2005 Contents Contents Handset at a glance . 27 27 27 28 28 28 29 29 29 30 31 31 31 31 33 33 Operating the handset . 34 2 Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / S440_laender_IVZ. fm / 16. 09. 2005 Contents Connecting the base station to the PABX . [. . . ] A Gigaset S58 handset can be registered on up to four base stations. Manual registration of a Gigaset S58 handset to a Gigaset S58 base station You must activate manual registration of the handset at both the handset and the base station. ~ Enter the system PIN of the base station (the default is 0000) and press OK. Base 1. Automatic registration of a Gigaset S58 handset to a Gigaset S58 base station Important: The handset must not already be registered to any base station. Registration of the handset to the Gigaset S58 base station occurs automatically. Place the handset in the base station with its display facing forward. During this process Regstr. Procedure appears in the display and the name of the base station flashes e. g. Base 1. When the handset has registered, its screen displays its internal number, e. g. If all internal numbers 1-4 have been assigned, number 4 is overwritten, provided the handset with the internal number 4 is in idle status. On the handset On the base station Within 60 secs. press and hold the registration/paging key on the base station (approx. 3 secs. ). Registering other handsets You can register other Gigaset handsets and handsets for other devices with GAP functionality as follows. On the handset Notes: Automatic registration is not possible when the base station on which you wish to register the handset is being used to make a call. If automatic registration does not work, you will have to register the handset manually. You can change the name of the handset (page 24). Start to register the handset as described in its user guide. On the base station Press and hold the registration/paging key on the base station (approx. 3 secs. ). 21 Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / registration. fm / 16. 09. 2005 Using several handsets De-registering handsets You can de-register any registered handset from any registered Gigaset S58 handset. Yes Press the display key. Changing the name of the base station Names "Base 1" to "Base 4" are assigned automatically. a Press and hold (idle status). Locating a handset ("Paging") You can locate your handset using the base station. All handsets will ring at the same time ("Paging"), even if the ringers are switched off. Making internal calls Internal calls to other handsets registered on the same base station are free. Calling a specific handset u ~ Or: u s c u * Initiate internal call. Press the end call key. Ending paging /c Briefly press the registration/ paging key on the base station or the talk key on the handset. Changing the base station If your handset is registered to more than one base station, you can set it to a particular base station or to the base station that has the best reception (Best Base). v Handset Select Base s Select one of the registered base stations or Best Base and press OK. Calling all handsets ("group call") Ending calls a 22 Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / registration. fm / 16. 09. 2005 Using several handsets Transferring a call to another handset You can transfer an external call to another handset (connect). When the internal participant answers: If necessary announce the external call. If the internal participant does not answer or is busy, press the display key End, to return to the external call. When diverting a call you can also press the end call key a before the internal participant lifts the receiver. Then, if the internal participant does not answer or is busy, the call will automatically return to you (the display will show Recall). Accepting/rejecting call waiting If you get an external call while conducting an internal call, you will hear the call waiting tone (short tone). [. . . ] You hear an error tone when keying an input (a descending sequence of tones). Watch the display and refer to the operating instructions if necessary. www. siemens. com. cn/shc Or call to the hotline: +86-4006 706 007 The table below contains a list of common problems and possible solutions. The display is blank. The handset does not respond to a key press. 36 Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / appendix. fm / 16. 09. 2005 Appendix Recommended batteries Nickel-metal-hydride (NiMH) type-AAA: u GP 850 mAh u Sanyo NiMH 800 u Yuasa Technologies AAA 800 The handset is supplied with recommended batteries. General specifications WDCT standard No. of channels Radio frequency range Duplex method Channel spacing Bit rate Modulation Transmission power Range Base station power supply Environmental conditions for operation Dialling mode Base station dimensions Handset dimensions Base station weight is supported 80 duplex channels 2400-2483. 5 MHz Time multiplex, 10 ms frame length 864 kHz 576 kbit/s GFSK Max 25 mW, average power per channel up to 300 m outdoors, up to 50 m indoors 220 V ~/50 Hz +5 C to +45 C; 20 % to 75 % relative humidity DTMF (tone dialling)/ DP (dial pulsing) 115 x 109 x 75 mm (L x W x H) 141 x 51 x 28 mm (L W H) 116 g Handset operating times/ charging times Capacity Standby time Calling time Charging time 800 mAh approx. [. . . ]