User manual SIEMENS W10

[. . . ] Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 SIEMENS HWCD8518(3)P/TSDL Be inspired Siemens W10 Expandable cordless phone system User Manual 1 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 Table of contents Preparing to use your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 The pack contains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Descriptions of displays of the handset and the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] fully charged (handset) Batteries flat (handset) New incoming call records Outgoing call records Directory Repeat call records The ringer is programmed off (Hour: minute (Date-month) (handset) Date (base) Pin lock (base) Base in use, handset is in standby (handset) 5 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 Descriptions of the function keys and the indicators Description of the function keys on the handset IP numbers storage or dialing To Enter Directory/Set program To Confirm the selected options in Setting mode To Exit the program Internal calls between handset and base Channel/Select(directory/incoming records/outgoing records) End/delete/handset registration To Redial call - To Insert dialing pause when dialing or storing phone numbers Talk/End Incoming call: enter caller records Outgoing call: enter dial-out records To adjust volume when talking To scroll up/down and select Display the rest phone numbers Description of the function keys and the indicators on the base In use Power on Hands-Free talk/hang-up IP numbers storage or dialing Enter directory/Set program Confirm the selected options in Setting mode Delete/handset registration Select (directory/incoming call records/outgoing call records) To page handset Enter intercom mode Exit options or Set mode Adjust hands-free voice volume 6 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 Talk holding - Incoming call: enter caller records mode - Outgoing call: enter dial-our records mode - To scroll up/down and select Redial/Dialing Pause - To insert dialing pause when storing numbers End call Display the rest phone numbers 7 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 Settings "Tone/pulse" switch On the rare of the base is a "Tone/Pulse" switch for tone or pulse mode selection. "Flash timing" switch On the rare of the base is a "Flash time" switch with three flash time selections, 90ms, 270ms and 600ms. (8 melodies) Press the Mem/Prog key for confirmation Press Exit to exit Note: you must apply for "Show incoming call number" service (or Caller ID Service) to validate this function. Select Caller Ringer Tones (handset and base) Press the Mem/Prog key for 3 seconds Press the Channel/Select key until "Int Ring" appears Press or to select the melody. (8 melodies) Press the Mem/Prog key for confirmation Press Exit to exit Registering the Handset (INT) You can register up to four handsets on your base. If you want to know the registration number of each handset, press the "INT" key on the handset, then the register number will be displayed on the handset (HS 1, HS 2, HS 3, or HS 4). Long press the "INT" key on the base (do not release until registration for all handsets has been completed), until "CodE ____" is displayed on the LCD of the base. Press the "INT" key on a handset (the handset and the base will respectively display "HS 1" and "CodE ____" register numbers, and when both the handset and the base ring, you can release the key on the handset, then release the key on the base). Activating/deactivating Ringer Handset Activating ring Be sure the handset is in standby. Then press the # key, the handset will sound a confirmation tone. 10 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 The base Adjusting the ringer volume Be sure the base is in standby. (If the * key is pressed, the volume will be set to "high volume". ) Handset and base Deactivate ringer Be sure both the handset and the base are in standby. Then press the "Redial/Pause" key on the handset or the base, "Ringer Off" will flash. At the same time, the handset or the base will sound a confirmation tone. Adjust Volume Handset Press volume or to adjust the volume of the handset when talking. Base Press the Volume/Set time key to adjust the handsfree volume when using hands-free talking. 11 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 Basic operation Answering/Ending a call Base Press the Hands-free/Dial back key to answer a call, and press the same key to end a call. Or pick up the handset of the base to answer, then put it down to end. Press the same key or place the handset back to its charger to hang up. Making A Call Base Press the Hands-free/Dial back key and then dial a number. You can also dial a number and then press the Hands-free/Dial back key. You can also dial a number and then pick up the speaker from the base to make a call. Handset Press Talk key and then enter a number, or enter a number and then press the Talk key to make a call. Outgoing call (Last number redialing) Press the Redial key, and then the relevant characters (REDIAL) will be displayed on the screen. Then press the Talk key on the handset or the Hands-free/Dial back key on the base, and the displayed number will be 12 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 automatically dialed out. Or Press the Talk key on the handset or the Hands-free/Dial back key on the base. Press the Redial key to automatically dial out the last dialed number. Deleting a single outgoing number Be sure the handset or the base is in standby. Press Flash/Clear key again to delete the selected record. Deleting all outgoing numbers Be sure the handset or the base is in standby. Then long press the Flash/Clear key on the handset or the base, do not release it until the LCD displays "Delete All". Press Flash/Clear key again to delete all the records. External call and power indicators When the base is powered, the power indicator will light. When answering or making external calls, the external call indicator will light. Call ending function Press the End/Delete/"INT" key on the handset or the End key on the base when finishing a call. [. . . ] The handset or the base will make a confirmation tone. 21 Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v. fm 16. 10. 03 Set to lock the numbers beginning with "0" (please set on the handset and base) User can restrict the numbers beginning with "0", Follow the following steps: Successively press #, #. The handset or the base will make a confirmation tone. Unlocking Successively press #, #. Note: if you forget the PIN, you can also unlock with the following methods: Cut off all the power supplies and then connect them. (This method will delete all set parameters in this phone. Mechanical lock Locking the mechanical lock at the back of the base can also prevent others from making calls beginning with "0". [. . . ]