User manual SMC SMCWIPCAM-G

[. . . ] ("SMC") warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable warranty term. SMC will endeavor to repair or replace any product returned under warranty within 30 days of receipt of the product. [. . . ] Then, you can select the upload mode and recording method from the following two fields: Shared Folder Mode and Recording Method. · Shared Folder Mode: You can set up this option by selecting None, Recording File Number, or Shared Folder Size. · Recording Method: Always: The recorded images will be always uploaded to the network share folder. Schedule: You can manage the uploading task by configuring the Day and Time options Smart Recording: Allows you to upload the recorded image only, and skip the empty files. To select this mode, you have to enable and configure the Motion Detection option first. 41 Port Click the Port item of the Tools submenu to bring up the following page, which allows you to setup the ports used to transmit the camera's data. - Enable UPnP Control Point: Setup the Web port to transmit the camera's image data. - Non UPnP: When you select this option, you can set up the following items manually. · Web Port: Setup the Web port to transmit the camera's image data. · AV Control Port: Setup the transmission of streaming data within the network. · IP View Lite Port: The default setting is port 5100. 42 Mail Click the Mail item of the Tools submenu to bring up the following page, which allows you to setup e-mail function of the camera. When you select By E-mail, the system will enable the alert function that notifies you the events of IP Change or Motion Detection by sending an e-mail. · SMTP Login Name: Enter the user name in this field to login receiver's e-mail server. · SMTP Password: Enter the user password in this field to login receiver's e-mail server. 43 · SMTP (mail) Server: SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail messages between servers you need to input the mail server address in this field. · Return Email Address: Enter the e-mail address of the user who will send the e-mail. · Recipient Email Address: Enter the e-mail address of the user who will receive the e-mail. - Motion Detection Set Skip Time: You can setup the duration of motion detecting. NOTE: You can click the Test button to test the e-mail account you provided. To test, you have to enable and configure the Motion Detection option first. 44 Advanced Account The Account submenu contains the options that allow you to add/delete users. Also, you can manage the users of the camera. - User Name: Enter the user name in this field. - Retype Password: Enter the user password again to confirm the password. You can modify and delete a user by click the respective icon. 45 Advanced Timezone The Timezone submenu displays the current time setting of the camera. For system management purpose, a correct time setting is critical to have accurate time stamps on the system logs. - Method: Allow you to setup the correct time by getting time from the computer or time server (need an Internet connection). - Time Zone: Select a time zone according to your location. 46 Maintenance The Maintenance menu contains two submenus: Configuration and Firmware Upload. Move your mouse onto the Maintenance button, and it will automatically pop up a submenu bar as below. Maintenance Configuration The Configuration submenu contains four options: Idle Time, Reset Default, Reboot and Status. Idle Time Click the Idle Time item of the Configuration submenu to bring up the following page, which allows you to setup the idle time of the camera. 47 - Administrator Inactivity Timer: location. If the user does nothing within the specified time in this option, the system would automatically logout. [. . . ] Communication on the network is governed by sets of rules called protocols. Protocols provide the guidelines devices use to communicate with each other, and thus they have different functions. Some protocols are responsible for formatting and presenting and presenting data that will be transferred from file server memory to the file server's net work adapter Others are responsible for filtering information between networks and forwarding data to its destination. Still other protocols dictate how data is transferred across the medium, and how servers respond to workstation requests and vice versa. [. . . ]