User manual SMEG C95GMXA1

[. . . ] Contents 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 2. 5 General safety instructions Identification plate Manufacturer liability Appliance purpose Disposal This user manual How to read the user manual General description Cooking hob Control panel Other parts Available accessories Instructions First use Using the accessories Using the storage compartment Using the hob Using the oven Cooking advice Programmer clock Instructions Cleaning the appliance Removing the door Cleaning the door glazing Cleaning the inside of the oven Extraordinary maintenance Clearances above and around domestic appliances Gas connection Adaptation to different types of gas Electrical connection Positioning 4 5 5 5 5 6 6 2 Description 7 7 7 8 8 9 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 3. 8 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 5. 1 5. 2 5. 3 5. 4 5. 5 10 10 11 11 12 13 14 15 16 4 Cleaning and maintenance 20 20 20 22 22 23 24 5 Installation 25 25 26 29 30 32 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance's aesthetic and functional qualities. For further information on the product: www. smeg. com. au 3 EN 1 Instructions 4 Instructions 1 Instructions 1. 1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Keep children under eight years of age at a safe distance if they are not constantly supervised. • This appliance may be used by children aged at least 8 and by people of reduced physical and mental capacity, or lacking in experience in the use of electrical appliances, as long they are supervised or instructed by adults who are responsible for their safety. [. . . ] • For successful proving, a container of water should be placed in the bottom of the oven. To save energy • Stop cooking a few minutes before the time normally used. Cooking will continue for the remaining minutes with the heat which has accumulated inside the oven. • Reduce any opening of the door to a minimum to avoid heat dispersal. 1 Minute minder timer key 2 Cooking duration key 3 End of cooking key 4 Value decrease key 5 Value increase key Please make sure the programmer clock shows the cooking duration symbol , otherwise the oven will not switch on. Press keys and at the same time to reset the programmer clock. 3. 8 Programmer clock 16 Use EN Setting the time If the time is not set, the oven will not switch on. On the first use, or after a power failure, the digits will be flashing on the appliance's display. The symbol on the display indicates that the appliance is ready to start cooking. Timed cooking Timed cooking is the function which allows a cooking operation to be started and then ended after a specific length of time set by the user. 3. 5 seconds without pressing any key in order for the function to activate. On the display, symbol turns off, symbol flashes and the buzzer sounds. To reset the set program, press keys and at the same time and switch off the oven manually. 1. The display will shows the digits and the symbol displayed between the hours and the minutes. Use the or key to set the required minutes. 17 Use Programmed cooking Programmed cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user. Set the cooking time as described in the previous point “Timed cooking”. The sum of the current time plus the pre-set cooking duration will appear on the display. 5 seconds without pressing any key in order for the function to activate. On the display, symbol turns off, symbol flashes and the buzzer sounds. Minute minder timer The minute minder timer does not stop the cooking operation but rather informs the user when the set time has run out. The minute minder timer can be activated at any time. The display shows the digits and the indicator light flashing between the hours and the minutes. 5 seconds without pressing any key to finish setting the minute minder. It is not possible to set a cooking time of more than 24 hours. After the minute minder timer has been programmed, the display will go back to showing the current time; to display the remaining time, press . Adjusting the buzzer volume The buzzer volume can be set to 3 different levels. [. . . ] It should be applied to an adjacent surface or this instruction manual. Perform the ground connection using a wire that is 20 mm longer than the other wires. 30 Installation The appliance can work in the following modes: • 220-240 V 1N~ use a 3 x 1, 5 mm² three-core cable. The values indicated above refer to the cross-section of the internal conductor. Fixed connection Fit the power line with an omnipolar circuit breaker in compliance with installation regulations. [. . . ]