User manual SMEG KSE59PO

[. . . ] Do not cover the ventilation holes at the top and on the sides of the appliance. Do not use any mechanical means or electrical devices to hasten the thawing process when cleaning the freezer compartment. If the supply cord is damaged it must be replaced by the manufacturer, manufacturer service agent or a similarly qualified person, in order to avoid a hazard. Avoid sparks do not turn on any electrical appliances or lighting fixtures. [. . . ] 1, 3) and insert them into the guides at the top back part of the appliance. We recommend the model FC35AP to fix additionally to the wall: · Inserts the supports into the guides at the top back part of the appliance (fig. Secure the appliance to a wall. POSITIONING · Place the appliance in a dry, well ventilated room. · The appliance should not be operated in an unheated room or porch. Place the appliance away from heat sources such as kitchen stove/ oven, radiators, or direct sunlight. · The appliance must not touch any pipes for heating, gas or water supply, or any other electrical devices. · Do not cover the ventilation holes at the top of the appliances­ it must be a good air circulation around the appliance. There should be a gap of at least 10 cm between the top 64 GB of the appliance body and any furniture that may be above it (fig. If this requirement is not followed, the appliance consumes more electrical energy and its compressor may overheat. · If the appliance is placed in a corner, a gap of at least 1 cm must be left between the appliance body and the wall so that the freezer compartment door can be opened enough to pull out the frozen product drawer (fig. · The appliance must stand on a level surface and must not touch the wall. Squeeze the sides of the light fixture cover GB the freezer compartment and place them in the apertures on the other side. Remove the covers 9 from the doors of the refrigeration compartment and the freezer compartment and place them in the apertures on the other side. Turn bracket 4 around 180° together with the washers on the axle and the plastic spacer, transferring the washers to the axle on the other side of the bracket. Once the bracket is attached to the freezer compartment door, fix it in place on the other side of the refrigerator. Turn the bracket 6 around 180° together with the washers on the axle and the plastic spacer. Remove the axle and the washers and reattach them on the other side of the bracket. Once the bracket 6 is attached to the refrigeration compartment door, fix it in place on the other side of the refrigerator in the uppermost apertures. Place the stoppers into the remaining apertures in the door, and put the screw caps in place. 1), where it evaporates. 66 GB FREEZING OF FOOD STUFFS IN THE FREEZER COMPARTMENT In the freezer compartment, the fast-freeze section is marked with the symbol . Fresh foodstuffs prepared for freezing should be placed in one or two layers in the fast-freeze section. After 24 hours, the frozen food products should be replaces from the quick-freeze section to the storage section drawer(s) (Fig. [. . . ] · Louder sounds like popping or clicking may be heard for a short time as the refrigerator's compressor switches on. OPERATION PROBLEMS AND THEIR SOLUTIONS (TROUBLESHOOTING) What if . . . · The appliance is plugged in to the mains but it does not work and the electricity supply voltage indicator is not illuminated. Check that the plug is correctly inserted into the electricity supply socket. Check that the appliance is standing stable, on a level place To make it level, regulate the front feet. [. . . ]