User manual SMEG LBW710IT

[. . . ] EN User Manual Washing Machine WASHING MACHINE User Manual LBW710IT CONTENTS CHAPTER-1: BEFORE USING THE APPLIANCE • Correct Usage 6-7 • • • • General warnings Safety warnings 20-21 22 8-9-10-11 12-13-14-15-16-17 18 19 Packaging and Environment Savings Information CHAPTER-2: • • OVERVIEW OF YOUR DEVICE General Appearance Specifications CHAPTER-3: INSTALLATION • • • • • Removing transportation safety screws Adjusting Adjustable Stays Electrical connection 23-24 25-26-27 28 29-30 31 32 33-34 35 36-37 Water inlet hose connection Water discharge connection CHAPTER-4: • • • INTRODUCTION OF CONTROL PANEL Detergent drawer Programme knob Electronic display CHAPTER-5 • PRELIMINARY PREPARATION FOR LAUNDERING Separating laundries EN -2- 38-39 CONTENTS • • • • • • • Putting laundries in the machine Adding detergent into machine Operating your machine Auxiliary Functions Child lock 40 41 42-43-44 45-46-47-48-49-50-51-52 53 54 55 56-57-58-59-60-61-62-63 Cancelling programme Finishing programme PROGRAM TABLE CHAPTER-6: CHAPTER-7: • • • • • MAINTENANCE AND CLEANING OF YOUR MACHINE Warning 64 65 66-67 68 68 69 70-71-72-73-77 Water inlet filters Pump filter Detergent drawer Liquid detergent apparatus CHAPTER-8: CHAPTER-9: CHAPTER-10: CHAPTER-11: • • FLUSH STOPPER / BODY / DRUM TROUBLE SHOOTING AUTOMATIC FAULT WARNINGS AND WHAT TO BE DONE PRACTICAL INFORMATION 75 76-77-78-79 80-81 How to read the energy label and saving energy Disposal of your old machine EN -3- 82 CHAPTER -1: BEFORE USING THE APPLIANCE (SAFETY WARNINGS) Operating voltage / frequency: (V/Hz) (220-240) V~/50Hz; Total current (A): 10 Water pressure (Mpa) Maximum: 1 Mpa / Minimum : 0. 1 Mpa Total power (W) : 2200 Maximum dry laundry capacity (kg): 7 Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base. The appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Call the nearest authorized service for a replacement if the power cord malfunctions. EN -4- CHAPTER -1: BEFORE USING THE APPLIANCE (SAFETY WARNINGS) Use only the new water inlet hose coming with your machine while making water inlet connections of your machine. Never use old, used or damaged water inlet hoses. [. . . ] • Use detergents produced for automatic washing machine in your machine. The amount of detergent you will use for your laundries is printed on the detergent package. • The higher the degree of hardness of the water the more detergent you will use. • The amount of the detergent you will use will increase as the amount of your laundries increase. • Put the softener in the softener compartment in the detergent drawer. • Softeners with high density are required to be thinned to a degree before being put in the drawer. Because high-density softener will clog the flush and avoid the flow of the softener. • You can use your liquid detergents in all programs without prewashing. For this, fit liquid detergent level plate in the accessories bag or the liquid detergent apparatus (*) into 2nd compartment of the detergent drawer and set the amount of liquid detergent according to the levels on this plate. (*)Machinery specifications may vary depending on the product purchased. EN -41- CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING (OPERATING YOUR MACHINE) • Plug your machine in. • Open the machine door. • Spread your laundries in your machine. • Push the door of your machine until hearing the locking sound to close it. Selecting programme Select the convenient programme for your laundries on the programme table. EN -42- CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING (OPERATING YOUR MACHINE) AUXILIARY FUNCTIONS Before starting the programme, you can optionally select an auxiliary function. • Press on the button of auxiliary function you would like to select. • If auxiliary function symbol on electronic display flashes continuously, the auxiliary function you have selected will be activated. • If auxiliary function symbol on electronic display blinks, the auxiliary function you have selected will not be activated. Reason for non-activation: • The auxiliary function you want to use in the washing programme you have selected is not applicable. • Your machine has passed over the stage, during which the auxiliary function you would like to select would be implemented. • It is not compatible with an auxiliary function you have selected previously. EN -43- CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING (OPERATING YOUR MACHINE) HALF-LOAD DETECTION SYSTEM Your machine features a half-load detection system. In case yuo put approximately half or less amount of launderies of maximum laundry capacity in your machine, your machine will run so as to save washing time, water consumption and energy in some programmes. When the half-load function is active, the machine can complete the programme you have set in a shorter time. EN -44- CHAPTER-5: PRELIMINARY PREPARATION FOR LAUNDERING AUXILIARY FUNCTIONS 1- Delay timer By using this auxiliary function, you can make your machine to start the washing operation with delays between “3h, 6h, 9h, 12h”. Auxiliary function button 1 To use auxiliary function of delayed start: - Press the delayed start button once. - “3 h” led shall appear. - Press on delayed start button until the time, on which you want washing operation to be started. - To activate the time delay you have selected in the programme, you may press on any auxiliary function button you like except “Start/Standby” button. EN -45- CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING AUXILIARY FUNCTIONS If you have skipped the time delay you want to set, you can go back to the time desired by keeping pressed on time delay button. [. . . ] (*) E02 Wash Rinse The water pressure or the water level inside the machine is low. End E03 Wash Rinse End The pump is faulty or pump filter is clogged or electrical connection of the pump is faulty. Your machine has excessive amount of water. E04 Wash Rinse Your machine will discharge water by itself. Pursuant to discharging operation, turn off your machine and unplug it. Turn off your faucet and contact the nearest authorised service. (*) See the chapter regarding maintenance and cleaning of your machine. EN -75- CHAPTER -11: PRACTICAL INFORMATION Alcoholic drinks: Spotted area should initially be washed using cold water, and then be wiped with glycerine and water and rinsed with vinegar-mixed water. Shoe shine: Spot should be rubbed out gently without damaging the cloth and be scrubbed and rinsed with detergent. [. . . ]