User manual SMEG SIMU536B

[. . . ] 5 Dual Size Surface Cooking Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Simmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Melt + Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When melting foods such as chocolate or butter, the surface cooking area can be set to the Melt function for minimal cooking power. For maximum surface cooking power, all cooktop touch-activated electronic controls can be set to Performance Boost function when bringing liquids to a fast and rapid boil. NOTE: This cooktop will also work with a 208V operation where 240V installation is not available. First use or after a power failure: After connecting the cooktop to an electrical power supply or after a power failure, the control panel will be locked. To unlock the control panel, press and hold CONTROL LOCK for 3 seconds. The indicator light will turn off, and the cooktop is ready for use. 5 To Use To Turn On the Cooktop: Press POWER. 1. The indicator light above the Power keypad and a dash (“-”) in each surface cooking area will light to indicate that each surface cooking area is ready to be activated. Inactivity for 1 minute after the main power has been turned on will automatically turn off the power to the cooktop. If a cooking function or the power slider is touched without first selecting a surface cooking area, all dashes (one for each zone) will flash and an invalid tone will sound 3 times. To Turn On a Surface Cooking Area: 1. Touch directly on the display area for the surface cooking area you want to use. The current power level and indicator light will flash for 10 seconds and then remain on. Touching any other feature or the power slider stops the flashing and information for the keypad that was touched will be displayed. After 3 seconds, a tone will sound and the indicator light above the Control Lock keypad will light, indicating that the cooktop controls are in the lockout position. If the cooktop is in use when Control Lock is activated, cooking will proceed as normal and any timers that have been set will continue their countdown. Bridge (on some models) To Unlock Cooktop: A B Touch and hold the CONTROL LOCK keypad for 3 seconds. A. Right side bridge  Performance Boost Function This function allows you to increase the heat setting level above the maximum heat setting 9 for 10 minutes or less. NOTE: Performance Boost is not available when the Bridge function is activated. The Bridge function can be activated when surface cooking areas are on or when they are off. The Bridge function allows you to use 2 cooking zones as an extra-large cooking zone. 7 30" (76. 2 cm) SIMU530 Performance Boost function is available on only 1 surface cooking area at a time within a zone. If you attempt to use another surface cooking area in the same zone, “P” and “9” will briefly flash in the display before returning to heat setting level 9. The surface cooking area that was set to the Performance Boost function will automatically reset to heat setting level 9. See the following illustrations for zones. A D 36" (91. 4 cm) SIMU536 Perfomance Boost can be used on all surface cooking areas at the same time. A C D P P P P P P P OFF OFF OFF SIM SIM MELT MELT SIM MELT SIM SIM MELT OFF P P MELT OFF TIMER Power Simmer Melt B B Control Lock OFF OFF SIM MELT SIM MELT B B E SIM MELT OFF SIM MELT OFF TIMER Power Simmer Melt Control Lock Zone 1 A. Surface cooking area 3, dual element with performance boost Zone 3 D. Surface cooking area 4 To Use: 1. Check that a surface cooking area has been selected. The “P” will no longer be visible in the display, and the Performance Boost function will no longer be active. [. . . ] The electronics require a controlled temperature in order to function reliably. The cooktop is fitted with a fan that runs at various speeds according to the temperature detected. The fan may also continue to run even after the cooktop has been switched off if the temperature it detects is too high. ■■ Error Code Cooktop has turned off and is beeping every 10 sec. F42, F43 Error An object, liquids or soils are putting pressure on the control panel. Solution Thoroughly wipe or remove any object on touch keys. ■■ The power voltage is too low or too high. Turn off the cooktop. [. . . ]