User manual SMEG SPR876RAGH

[. . . ] 30 MANUTENO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 2 2 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. [. . . ] Never use the hood for purposes other than for which it has been designed. Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides. Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. CAUTION: Accessible parts may become hot when used with cooking appliances. ?. MAINTENANCE ?Switch off or unplug the appliance from the mains supply before carrying out any maintenance work. Clean and/or replace the Filters after the specified time period (Fire hazard). Clean the hood using a damp cloth and a neutral liquid detergent. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. In all cases where the ceiling is not strong enough at the suspension point, the installer must provide strengthening using suitable plates and backing pieces anchored to the structurally sound parts. 1 1 2 2 Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe 150 or 120mm, the choice of which is left to the installer. To install a 120 mm air exhaust connection, insert the reducer flange 9 on the dumper 10. Remove any activated charcoal filters. 150 25 10 120 25 9 10 EN 7 7 RECIRCULATION VERSION AIR OUTLET ?Assemble the two halves of the hood body extension piece 14 (if necessary). Push fit the assembled hood body extension piece 14 onto the air outlet (if necessary). Push fit connection 15 onto the hood body extension piece 14 or directly onto the hood body. Insert the connection extension pieces laterally 14. 1 in connection 15. Should the central reinforcing piece of the frame somehow interfere the chimney air outlet grille, it is possible to unscrew it and to place it in another screw hole set. 15 14. 1 14 Flue assembly - Mounting the hood body ?Position the upper chimney section and fix the upper part to the frame using the 2 screws 12c (2, 9 x 6, 5) provided. Similarly, position the lower chimney section and fix the lower part to the frame using the 2 screws 12c (2, 9 x 6, 5) provided. Make sure that the outlet of the extension pieces 14. 1 is horizontally and vertically aligned with the chimney outlets. [. . . ] Position the finishing plug 27 over the housing in the diffuser support, fixing it using a screw 12e (2. 9 x 9. 5) and applying the 2 cable clamp elements 26 as indicated in figs. Store both the Connectors in the Protective box 24 and close it with 2 Screws 12e (2. 9 x 9. 5), provided. 6 5 ?Remove the protective film from the double-sided adhesive on the connection box, and fix it inside the motor compartment fig. 7. 7 EN 9 9 USE L1 L2 L3 L4 L T1 T2 Control panel T3 T4 But ton L Function Turns the lighting system on and off. Led - Press and hold for approx. [. . . ]