User manual SMEG WD-CONNECT

[. . . ] 5 APPLICATION INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] WDConnect software allows to communicate with the devices, glassware washers and washer disinfectors series "WD6010" and "GW6010". Once the connection is established, the user can: - Download the internal memory archive (Cycles Log) to keep track of disinfection cycles performed. Moreover the technician can: - Download an updated version of the machine firmware. The application is intended for personnel responsible for the equipment ("Responsible Body ") identified with the title of "Superuser". The basic user is not authorized to use the application. ESSENTIAL REQUIREMENTS    Operating system: Microsoft Windows 32 or 64bit, Windows 7 or more recent version, with Microsoft . NET Framework updated version. “USB” port functioning properly with updated drivers (especially the reference driver "STM32 virtual com port"). Cable “USB male - USB male”, 2 meters length (or lower) for the connection between PC and machine. 2 COMPATIBILITY – DEVICES The SOFTWARE can be used together with the following devices: GW SERIES – LABORATORY GLASSWARE WASHERS GW6010 WD SERIES – MEDICAL WASHER DISINFECTORS WD6010 4 3 INSTALLATION DRIVER “STM32 Virtual com port” installation Step 1: driver installation “STM32 virtual com port” (the driver can be found in the folder: “STM32 virtual com port” – it is also possible to download the driver file from the original website www. st. com). Confirmation by mouse "click" on the "OK" icon. CONNECTIONS Options to set up the communication with the washing device. You need to select the Port type used to connect via USB cable with the device and confirm your choice by pressing "Connect". A green circle next to the button will indicate whether the connection is successfully established. Please note: If the connection fails, there may be an error in the selection - retry checking the port actually used. 7 LAN PARAMETERS – IP CONFIGURATION Only if installed the optional to connect the device to the LAN, using this screen the Superuser can set the parameters for the communication. CAUTION: The following are network settings, they need to be set by competent staff with the help of the of the computer system administrator. 3 active icons: - Read: to read the current values set in the CPU motherboard. [. . . ] Please note: The operator can free the device memory only after downloading the archive. Warning: the clear memory operation is irreversible, the deleted data can not be recovered in any way. [. . . ]