User manual SMEG WD1160R36 ISTRUZIONI VARIE

[. . . ] WD2145 - WD1160 - WD4060 - WD4190 INSTRUCTION SHEET SELECTING THE WASHING PROGRAMME (WD4190 series only: give power supply by turning the main switch from position "0" to "I". [. . . ] - If the button is pressed again within 60 seconds – the cycle is re-started. - If the button isn’t pressed within 60 seconds: an automatic reset cycle is performed automatically to return the machine to the standby condition. DOOR OPENING Press the Door opening button: the appliance gives a beep when it receives the signal. Release the button and the door will open automatically after a few moments. RESET PROCEDURE Press the Functions and Start/Stop buttons and hold them down for about 2 seconds, until a beep is heard. + ALARMS LED MEANING When an alarm occurs: Led “Warning” on and display indication. If a non-fatal alarm occurs you can press the Start/Stop button to continue using the device. When an error occurs, generally the device manages the anomaly itself: in this case the alarm code flashes on the display until the problem has been dealt with: no reset commands are accepted during this time. [. . . ] For all the details concerning the correct and safe use of the devices in question, for the updated program table, for the interpretation of alarm messages and for the requirements for installation: Refer to the user manual and program table - full versions. [. . . ]