User manual SMEG WHT812LSIT

[. . . ] Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons. u The water supply and draining hoses must be securely fastened and remain undamaged. u While there is still water inside the product, never open the loading door or remove the filter. In case of forcing the loading door to open, the door and the lock mechanism may get damaged. [. . . ] It is normal that small differences may occur between the time shown on the display and the real washing time. ** Remaining moisture content values may differ according to the selected spin speed. 4. 3. 4 Programme selection 1 Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with the "Programme and consumption table". C Programmes are limited with the highest spin speed appropriate for that particular type of fabric. When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature. Higher temperature means higher power consumption. 2 Select the desired programme with the “Programme Selection” knob. 88 C 1888 0 88:88 4. 3. 5 Programmes • Cotone (Cottons) Use for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc. ). Your laundry will be washed with vigorous washing action for a longer washing cycle. • Sintetici (Synthetics) Use to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc. ). It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme. For curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing functions selected. As their meshed texture causes excessive foaming, wash the veils/tulle by putting little amount of detergent into the main wash compartment. Select the appropriate temperature complying with the tags of your clothes. “The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of machine washable wool products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. It is recommended to use special detergents produced for curtains in this programme. • Lingerie Use this programme to wash delicates such as underwears. If there is little amount of laundry, use a laundry net. Washing Machine / User’s Manual 45 / EN • Rinse Use when you want to rinse or starch separately. • Scarico + Centrifuga (Spin + Drain) Use to drain the water in the machine. 4. 3. 6 Temperature selection Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature indicator. It is possible that the recommended temperature value is not the maximum temperature that can be selected for the current programme. 88 C 1888 0 88:88 Press the Temperature Adjustment button to change the temperature. Finally, “-” symbol indicating the cold wash option appears on the display. 1888 0 C 88:88 C C C No change can be made in programmes where temperature adjustment is not allowed. You can also change the temperature after the washing starts. Changes cannot be made if the steps do not allow it. If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the temperature. 4. 3. 7 Spin speed selection Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the Spin Speed indicator. It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current programme. 88 C 1888 0 88:88 Press the Spin Speed Adjustment button to change the spin speed. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. C 46 / EN Spin Speed Adjustment button only serves for decreasing the spin speed. Rinse Hold option is indicated with “ı_ı” symbol and No Spin option is indicated with “_” symbol. If you are not going to unload your laundry immediately after the programme completes, you can use Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the machine. This function holds the laundry in the final rinsing water. Washing Machine / User’s Manual 88 C 0 88:88 If you want to spin your laundry after the Rinse Hold function: - Adjust the Spin Speed. If you want to discharge the water at the end of the programme without spinning, use No Spin function. 88 C 0 88:88 C No change can be made in programmes where spin speed adjustment is not allowed. You can change the spin speed after the washing starts if the washing steps allow it. [. . . ] Load with amounts recommended in the "Programme and consumption table". ŠŠSelect the proper programme and temperature for the laundry to be washed. For this, please see 4. 4. 2. Washing performance is poor: Laundry turns gray. Washing performance is poor: Insufficient amount of detergent is used. [. . . ]