User manual SONY CDX-R3350

[. . . ] Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of Sony Corporation. ­ BTM (Best Tuning Memory) function: the unit selects strong signal stations and stores them. [. . . ] With the card remote commander In step 2, to select the programme type, press M or m. Note You cannot use this function in countries/regions where no PTY data is available. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. With the card remote commander In step 2, to adjust the selected item, press <, M, , or m. You can adjust and store the equalizer settings for different tone ranges. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. The CT function may not work even though an RDS station is being received. ⷠThere might be a difference between the time set by the CT function and the actual time. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. With the card remote commander In step 3, to adjust the selected item, press <, M, , or m. To scroll long displayed items automatically when the group/ track is changed. With the card remote commander In step 3, to select the setting, press < or , . Unit number Disc number The following items can be set (follow the page reference for details): "z" indicates the default settings. Repeat and shuffle play With the card remote commander In step 2, to select the character, press M or m. 1 Select the unit that has stored the custom name you want to delete, then press and hold (LIST). With the card remote commander In step 3, to select the name, press M or m. *2 When one or more CD changers, or two or more MD changers are connected. To return to normal play mode, select "REPOFF" or "SHUF-OFF. " Tip "SHUF-ALL" will not shuffle tracks between CD units and MD changers. You can select a disc from the list when connecting a CD changer with the CUSTOM FILE function or an MD changer. With the card remote commander In step 2, to select the disc, press M or m. (CDX-R3350C only) When you play a disc in a CD changer with the CUSTOM FILE function, you can label each disc with a custom name up to 8 characters (Disc Memo). [. . . ] ⷠDo not hold the battery with metallic tweezers, otherwise a short-circuit may occur. When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows again after replacement, there may be an internal malfunction. Note This unit cannot be connected to a digital preamplifier or an equalizer which is Sony BUS system compatible. [. . . ]