User manual SONY CDX-RA550

[. . . ] Warning if your car's ignition has no ACC position After turning the ignition off, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] There might be a difference between the time set by the CT function and the actual time. The unit starts to search for a station broadcasting the selected programme type. Other functions Changing the sound settings With the card remote commander In step 3, to adjust the selected item, press <, M, , or m. With the card remote commander In step 3, to select the setting, press < or , . After 3 seconds, the setting is complete and the display returns to normal play/reception mode. The following items can be set (follow the page reference for details): "z" indicates the default settings. ­ "DIM-AT" (z): to dim the display automatically when you turn lights on. With the card remote commander In step 2, to adjust the selected item, press <, M, , or m. "CUSTOM" of EQ3 allows you to make your own equalizer settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Repeat and shuffle play *1 When one or more CD/MD changers are connected. *2 When one or more CD changers, or two or more MD changers are connected. To return to normal play mode, select "REPOFF" or "SHUF-OFF. " Tip "SHUF-ALL" will not shuffle tracks between CD units and MD changers. The corresponding buttons on the rotary commander control the same functions as those on this unit. The following controls on the rotary commander require a different operation from the unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers. Note When connecting a portable device, be sure BUS CONTROL IN is not connected. if a device is connected to BUS CONTROL IN , "AUX" cannot be selected by (SOURCE). Tip When connecting both a portable device and a changer, use the optional AUX-IN selector. If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. [. . . ] Before going through the checklist below, check the connection and operating procedures. If the unit is turned off and the display disappears, it cannot be operated with the remote commander. An optional power amplifier is connected and you are not using the built-in amplifier. The leads are not matched correctly with the car's accessory power connector. [. . . ]