User manual SONY MEX-BT2500

[. . . ] , declares that this MEXBT2500 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ] After 3 seconds, the setting is complete and the display returns to normal play/reception mode. The following items can be set (follow the page reference for details): "z" indicates the default settings. OFF (Auto Off) To shut off automatically after a desired time when the unit is turned off: "A. LOCAL (Local Seek Mode) ­ "LOCAL-ON" : to only tune into stations with stronger signals. With the card remote commander In step 2, to adjust the selected item, press <, M, , or m. "CUSTOM" of EQ lite allows you to make your own equalizer settings. The volume level is adjustable in 1 dB steps, from ­10 dB to +10 dB. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. With the card remote commander In step 3, to adjust the selected item, press <, M, , or m. By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Be sure to adjust the volume for each connected audio device before playback. 5 Press the select button repeatedly until "AUX" appears, and rotate the volume control dial to adjust the input level (­8 dB to +18 dB). If your car has been parked in direct sunlight, allow the unit to cool off before operating it. ⷠPower antenna (aerial) will extend automatically while the unit is operating. Before playing, clean the discs with a commercially available cleaning cloth. Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. ⷠYou cannot play a CD-R/a CD-RW that is not finalized. On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and display of the unit. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. Music discs encoded with copyright protection technologies This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. [. . . ] The leads are not matched correctly with the car's accessory power connector. Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's antenna (aerial) booster (only when your car has built-in FM/MW/LW antenna (aerial) in the rear/side glass). The station does not broadcast any traffic announcements despite being TP. ⷠBefore the pairing is made, set this unit to pairing standby mode. [. . . ]