User manual SONY RDP-M7IP/SC

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY RDP-M7IP/SC. We hope that this SONY RDP-M7IP/SC user guide will be useful to you.


SONY RDP-M7IP/SC : Download the complete user guide (1300 Ko)

You may also download the following manuals related to this product:

   SONY RDP-M7IP/SC DATASHEET (178 ko)

Manual abstract: user guide SONY RDP-M7IP/SC

Detailed instructions for use are in the User's Guide.

[. . . ] 4 CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 HOW TO USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 FEATURES · Tracks from 10 CDs stored in the disc magazine can be selected and played. [. . . ] 10 FEATURES · Tracks from 10 CDs stored in the disc magazine can be selected and played. · Horizontal, vertical, slanted or suspended installation can be made. · Through the window at the top of the unit, you can see a disc spinning as it plays. · Since it is smaller in size, you will find it easier to install the unit. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Connect the equipment into an outlet on circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/ TV technician for help. In addition to ordinary CDs, CD-Rs or CD-RWs can be read by this unit. Retain these screws and replace them in the original positions if the unit is transported for service or maintenance. Insert a pointed object such as a screw driver or ball-point pen, etc. into the low spot of the lever and slide the lever to the position from among HORIZONTAL, 45°, and VERTICAL positions. Notes · Be sure to eject the disc magazine when you set the levers. · Care must be taken when you mount the unit at the angle of lower than level. · Do NOT turn over the unit or slide the lever when the unit is activated. · The mounting angle setting levers on each side of the unit are factory-set to the HORIZONTAL position. · When you complete the setting, attach the supplied adhesive labels e over the slots. ENGLISH 4 INSTALLATIONS Horizontal installation 1 Construction For details on abc. . . , see page 3. The effective angle of the unit. The position of the lever. ;; ; ;; ; ; ; Note If the mounting surface needs to be strengthened, secure the plate brackets c to the bottom surface of the car trunk, etc. with the tapping screws (not supplied). 2 Deciding the position 4 Making holes in the carpet 3 Removing temporarily 5 Completion 5 ENGLISH Vertical installation 1 Construction For details on abc. . . , see page 3. The effective angle of the unit. The position of the lever. 30° 15° V Notes · If the mounting surface needs to be strengthened, secure the plate brackets c to the bottom surface of the car trunk, etc. · If installation space is narrow, bend the plate bracket c back and forth along the perforated line to break off the end. ;; ;; ; ; ; ; 2 Deciding the position 4 Making holes in the carpet Cut the plate bracket c if it is too long. 3 Removing temporarily 5 Completion ENGLISH 6 INSTALLATIONS Suspended installation When installing the unit in the trunk below the package tray, observe the following. · Select the mounting location carefully so that the unit does not hinder the movement of the torsion bars of the deck lid. Caution Before drilling the holes, make sure that there is nothing on the other side of the mounting surface. 1 Construction For details on abc. . . , see page 3. The effective angle of the unit. The position of the lever. 2 Making holes 3 Completion Tapping screws are not supplied. Slanted installation 15° 15° 45° Note on the brackets a Be sure to set the mounting angle setting levers to the 45° position. [. . . ] · If installation space is narrow, bend the plate bracket c back and forth along the perforated line to break off the end. ;; ;; ; ; ; ; 2 Deciding the position 4 Making holes in the carpet Cut the plate bracket c if it is too long. 3 Removing temporarily 5 Completion ENGLISH 6 INSTALLATIONS Suspended installation When installing the unit in the trunk below the package tray, observe the following. · Select the mounting location carefully so that the unit does not hinder the movement of the torsion bars of the deck lid. Caution Before drilling the holes, make sure that there is nothing on the other side of the mounting surface. 1 Construction For details on abc. . . , see page 3. The effective angle of the unit. The position of the lever. 2 Making holes 3 Completion Tapping screws are not supplied. Slanted installation 15° 15° 45° Note on the brackets a Be sure to set the mounting angle setting levers to the 45° position. To save installation space, you can place the brackets a inside out, as illustrated below. 7 ENGLISH CONNECTIONS This unit is designed only for AIWA brand car stereo. Therefore you cannot use the unit with other brand's equipment. Compact disc changer Connecting cable (supplied) to AIWA brand car stereo Caution Be sure to disconnect the ground wire terminal of the car battery before making a connection in order to prevent short circuiting. Note Use only the supplied connecting cable. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY RDP-M7IP/SC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY RDP-M7IP/SC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.