User manual SONY SLV-M20HF

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY SLV-M20HF. We hope that this SONY SLV-M20HF user guide will be useful to you.


SONY SLV-M20HF : Download the complete user guide (703 Ko)

You may also download the following manuals related to this product:

   SONY SLV-M20HF annexe 1 (701 ko)
   SONY SLV-M20HF HOOKUP/SETUP GUIDE (2388 ko)
   SONY SLV-M20HF DIMENSIONS DIAGRAM (54 ko)

Manual abstract: user guide SONY SLV-M20HF

Detailed instructions for use are in the User's Guide.

[. . . ] Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers. [. . . ] Recording after locating the Blank Time space The SmartFile function identifies not only the largest amount of available blank space, but also recorded material that doesn't have corresponding program data stored in the SmartFile label. The longest available recording space (including programs that are not stored on the SmartFile label) is referred to as "Blank Time space. " You can locate the beginning of the Blank Time space for recording. If there is a recorded program after the Blank Time space, the VCR will over-record on that program unless you stop recording. If there is a program you want to prevent from being recorded over or erased, protect that program before you start recording another program (see pages 52 through 53). The VCR turns on, the SMARTFILE indicator lights up, and the SmartFile search list automatically appears on the TV screen. Select a tape speed that matches the length of the program you want to record. If a newly recorded program overlaps a stored program, the stored program information is erased from the SmartFile list when: ­ the stored program is over-recorded for more than about 15 minutes in EP mode and about 5 minutes in SP mode. ­ the remaining length of the stored program becomes less than about 15 minutes in EP mode and about 5 minutes in SP mode. ⷠYou may not be able to locate the beginning of the Blank Time space correctly in the above step 4 when: ­ the SmartFile tape contains one or more short length (less than about 15 minutes in EP mode and about 5 minutes in SP mode) recorded programs of which program data are not stored in the SmartFile label. The VCR turns on, the SMARTFILE indicator lights up, and the SmartFile search list automatically appears on the TV screen. You may not be able to locate the beginning of the selected program correctly when: ­ the SmartFile tape contains one or more short length (less than about 15 minutes in EP mode and about 5 minutes in SP mode) recorded programs of which program data are not stored in the SmartFile label. This feature allows you to quickly find a specific program or to find a tape with enough recording space. Slowly bring the center of the label within 3 cm of the SmartFile sensor. There is a short beep, the SMARTFILE indicator lights up, and the SmartFile check list appears. If you press a button other than SP/EP or the cursor stick (OK), the SmartFile check list disappears. ⷠYou can turn the pages by pushing the cursor stick to >/. You cannot display the SmartFile check list while: ­ you display the SmartFile list of a different SmartFile tape inserted into the VCR. ⷠIf the SmartFile check list doesn't appear on the TV screen, try again by drawing the SmartFile tape away from the SmartFile sensor at least 5 cm, then bring it back to within 3 cm of the sensor. The VCR turns on, the SMARTFILE indicator lights up, and the SmartFile search list automatically appears on the TV screen. The program label is erased and the recording day of the week, start time, and channel number reappear. The VCR turns on, the SMARTFILE indicator lights up, and the SmartFile search list automatically appears on the TV screen. [. . . ] When you use cable box control, make sure the CABLE BOX CONTROL option is set to ON. Symptom The Grid menu doesn't appear on the TV screen when you press GUIDE. The GUIDE Plus+ or VCR Plus+ timer recording program does not record, or timer recording stops halfway. A power cut occurred or the VCR was disconnected from the wall outlet for more than one hour. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SLV-M20HF




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SLV-M20HF will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.