User manual SONY VAIO VGN-Z780D

[. . . ] (See Figure 1. ) To assemble the two pieces, hold the easel with the Fujitsu logo facing towards you, and align the tabs on the bottom of the easel with the corresponding holes in the base. Press the easel down until it is securely in place. USB Ports External Video Connector DC Power Jack LAN Connector Stability Stand Figure 2. Docking Cradle - Rear FRONT/RIGHT SIDE COMPONENTS The following is a brief description of the Docking Cradle's front and right side components. [. . . ] Docking Cradle - Rear FRONT/RIGHT SIDE COMPONENTS The following is a brief description of the Docking Cradle's front and right side components. (Figure 1) Docking Connector The docking connector mates with the connector on the bottom of the LifeBook to connect the two electronically. USB Port There are four USB 2. 0 ports on the Docking Cradle, one on the right side and three on the rear. USB 2. 0 ports let you connect any USB 2. 0 device for up to 480 Mbps transfer rate. USB 2. 0 is backward-compatible with USB 1. 1. 2 Notebook Easel The notebook easel is the platform on which the LifeBook rests when connected to the Docking Cradle. REAR PANEL COMPONENTS The following is a brief description of the Docking Cradle's rear components. (Figure 2) DC Power Jack The DC power jack allows you to plug in the AC adapter or the optional Auto/Airline adapter to power your notebook. USB Ports There are four USB 2. 0 ports on the Docking Cradle, one on the right side and three on the rear. USB 2. 0 ports let you connect any USB 2. 0 device for up to 480 Mbps transfer rate. USB 2. 0 is backward-compatible with USB 1. 1. External Video Connector The external video connector allows you to connect an external video device such as a monitor or projector. LAN (RJ-45) Jack The LAN port lets you connect an RJ-45 cable. 3. Align the LAN connector with the port opening on the rear of the Docking Cradle (Figure 5). Connecting the LAN/Docking Cradle Connecting an External Video Device 1. Align the external video cable to the connector on the Docking Cradle (Figure 6). Tighten the two hold-down screws, located on each side of the connector. Figure 6. Connecting an external video device 6 Connecting a USB Device There are four USB 2. 0 ports on the optional Docking Cradle; one on the right and three on the rear. Push the connector into the port until it is seated. . Note that in order for the USB ports on the Docking Cradle to work, the Docking Cradle must be powered using an AC Adapter. 2. Figure 7. Connecting a USB device 7 Fujitsu Computer Systems Corporation 1250 E. [. . . ] Push the connector into the port until it is seated. . Note that in order for the USB ports on the Docking Cradle to work, the Docking Cradle must be powered using an AC Adapter. 2. Figure 7. Connecting a USB device 7 Fujitsu Computer Systems Corporation 1250 E. Arques Avenue, (M/S 122) Sunnyvale, California 94085 For more information, call 1-800-SONY or visit our Web site at: www. shopfujitsu. com For technical support call:1-800-8SONY (1-800-838-5487) or e-mail us at: 8fujitsu@us. fujitsu. com Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd. [. . . ]