User manual SONY XLR-K1M

[. . . ] W Removing drawers: Pull forward until the drawer stops and lift out, fig. A5: If you need space for large bottles and containers, then simply push the front half of glass shelf 1 back. For cleaning, the holder 2 can be used to remove the half glass shelves. A6 1Appliance designation 2 Service number 3 Appliance number 4Freezing capacity . . . [. . . ] W Only store high-percentage alcohol in tightly sealed, The wires in the mains lead are coloured in accordance with upright containers. W Do not allow naked flames or ignition sources to enter the the following code: green/yellow = earth, appliance. If this machine or appliance is fitted with a non-rewireable plug, W This appliance is not intended for use by persons (incluthe following information applies: If the socket outlets are not ding children) with reduced physical, sensory or mental suitable for the plug supplied with this product, it must be cut capabilities or lack of experience and knowledge unless off and an appropriate plug fitted. The plug cut from the flexi-ble they have been given initial supervision or instruction concerning use of the appliance by a person responsible cord should be disposed of and on no account be inserted into a 13 A socket elsewhere in the house (electric shock hazard). Children should be supervised to ensure The fuse cover must be re-fitted when changing the fuse, and if that they do not play with the appliance. the fuse cover is lost the plug must not be used until a suitable WAvoid prolonged skin contact with cold surfaces or chilreplacement is obtained. W Switching on the fridge section: When the fridge section is switched on, the freezer section is switched on, too. The fridge and freezer sections are switched on. Switching the appliance on and off Fig. A1 Temperature display The following are displayed in normal mode: - The set freezer temperature - The set fridge temperature. The display flashes: - The temperature setting is being changed - The temperature has risen by several degrees. Temperature alarm For the freezer section When the freezer temperature is no longer cold enough, the acoustic warning signal sounds. The following may be the cause of the temperature being too high: - Fresh hot food has been put in - Too much warm air has got in while you were sorting out the freezer or removing items. Always insert packaging in a dry condition to avoid packaging freezing together. W Always provide packaging with date and contents and do not exceed the recommended storage time of the frozen food, in order to prevent reductions in quality. WAlways package food which you freeze yourself in suitable portions for your household. So that the food freezes SuperFrost quickly through to the core, the following quantities per The fresh foods should be frozen to the core as quickly as package should not be exceeded: possible and frozen foods already stored be given a "cold - Fruit and vegetables up to 1 kg, reserve". This is the best way of maintaining the nutritional W After wasing and portioning, blanch vegetables (immerse value, appearance and flavour of frozen foods. in boiling water for 2-3 minutes, then remove and cool W The maximum amount of fresh food which can be frozen in cold water). If blanching with a steamer or microwave, in 24 hours is shown on the rating plate ("Freezing capacobserve the relevant instructions). The maximum quantity of W Do not salt or season food and blanched vegetables frozen food varies according to model and climatic class. W Do not freeze bottles and tins containing carbonated Freezing with SuperFrost beverages, as otherwise they may burst. A1/7 You do not have to switch SuperFrost on: W For storage: The individual storage tray can support - when inserting already frozen foods, max. W VarioSpace: By removing the 2nd and 3rd draw and the storage tray, you obtain the storage space for bulky goods W Press SuperFrost button 7 briefly, so that the LED lights equivalent to two drawer heights. [. . . ] Fitting the lower door - Place the lower door from above onto the lower bearing pin. 2 (11) in the lower door, on the new hinge side, through the middle turn hinge Fig. Fitting the upper door - Place the upper door on the middle bearing pin Fig. - Screw the upper turn hinge firmly into place (with 4 Nm) (2x Torx® 25) Fig. [. . . ]