User manual STRONG SRT 4401
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual STRONG SRT 4401. We hope that this STRONG SRT 4401 user guide will be useful to you.
You may also download the following manuals related to this product:
STRONG SRT 4401 (1767 ko)
STRONG SRT 4401 (620 ko)
STRONG SRT 4401 (546 ko)
STRONG SRT 4401 (690 ko)
STRONG SRT 4401 (541 ko)
STRONG SRT 4401 (690 ko)
STRONG SRT 4401 (620 ko)
STRONG SRT 4401 (1767 ko)
STRONG SRT 4401 (546 ko)
STRONG SRT 4401 (541 ko)
STRONG SRT 4401 BROCHURE (887 ko)
STRONG SRT 4401 BROCHURE (486 ko)
Manual abstract: user guide STRONG SRT 4401
Detailed instructions for use are in the User's Guide.
[. . . ] This receiver is of our latest development and it is designed to be capable of upgrading its software through the satellite and the Internet. It is highly recommended that you read this manual carefully to safely install your receiver and to achieve its optimum performance.
Content 1. Usage
This user manual is applicable for Strong SRT 4401 Evolution Digital Satellite Receiver and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. [. . . ] You can change your TV settings by changing the following: Aspect: Press the Right button and set your aspect to "4:3" or "16:9" Screen Mode: Press the Right button and set your screen mode to "Pan Scan" or "Letterbox". RF TV Mode: Press the Right button and set your TV mode to "PAL-BG", "PAL-I", "PAL-DK" or "NTSC". UHF: Press the Right button and set the UHF channel number to the same UHF channel number of your TV set. This only has to be done if your TV set is connected with a coaxial (RF) Cable. If the UHF Channel numbers of the receiver and the TV set are not set the same, no picture will be displayed. RGB/CVBS: Press the Right button and set the TV mode to "CVBS" (Composite video) or "RGB" (preferred option if your TV set is compatible with it). Transparency: Press the Right button and select how transparent you want your OSD. Brightness: Press the Right button and select how you want theOSD to be. Contrast: Press the Right button and select how you want the contrast to be. Saturation: Press the Right button and select how saturated the screen to be.
1.
2.
1.
3.
2. 9.
27
28
·
Parental Lock: This function changes the Personal Identification Number (PIN) that is used to control access to the menu and individual channels. In this function, you can lock/unlock channels and you can change your PIN code by applying the following steps: Menu: Using RIGHT / LEFT keys, you can select either "lock" or "unlock" and press OK. By selecting "lock", the receiver asks you to enter your PIN every time you want to access the menu. By selecting "unlock" it gives you the possibility to access the menu all the time without the receiver asking you for a PIN code. Current PIN: Enter `1111' New PIN: Enter a new PIN Retype PIN: Enter the same new PIN
1.
5. 1. 3 Installation Menu All settings that are related to TV, Dish, LNB and Satellites are within this menu. The installation menu contains "Antenna Setup", "Diseqc1. 2 Setup", "Manual Scan" sub-menus. To access the different sub menus, apply the following steps:
It is recommended that you read the manual and installation instructions of your LNB, your DiSEqC switch, your 0/12V switch and your Positioner before you start setting up your receiver. Antenna Setup Menu: To set up your antenna, please apply the following steps: 1. Use the UP/DOWN keys on your remote to select an item and use the LEFT/RIGHT buttons to set up any values. · · · Antenna: Select an index for the satellite you wish to scan Satellite: Select the satellite you wish to scan from the satellite list. If you have different LNB type select `0" and type the local oscillator value. In UNI1=9750/10600 MHz, UNI2=9750/10700MHz, UNI3=9750/10750 MHz 13/18V: Select auto, 13/18V, 13V or 18V for LNB. [. . . ] (Short circuit in the LNB cable) The batteries of the remote control are not inserted or exhausted.
Disconnect the 220V main power and ask your dealer to check the LNB cable.
The remote control is not working.
No sound
The receiver or TV is in "MUTE"' mode Problem in scart cable connections between receiver and TV This is normal, the bad weather is interfering the signal between the satellite and your dish
Check whether the batteries are inserted correctly in your remote control. Check the batteries, and if they are exhausted, replace them.
No sound or picture
The receiver displays the message ` No or Bad signal" during bad weather conditions (heavy rain or snow)
39
40
A. 2 Specifications:
1. Smart card - 1 Smart card slot - ISO 7816, GSM11. 11 and EMV (payment systems) compatibility 2. Tuner & Channel Input Connector Frequency Range Input Impedance Input sensitivity LNB Power Polarization 22kHz Tone DiSEqC Control Demodulation Input Symbol Rate FEC Decoder 3. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STRONG SRT 4401
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual STRONG SRT 4401 will begin.