User manual STRONG SRT 6160 PDR

[. . . ] SRT 6160 Digital Satellite Receiver with Personal Digital Recorder ANT IN COAXIAL 1 27 29 26 25 23 28 9 15 12 EPG FREEZE 28 JUMP 30 16 PVR SLEEP REPEAT 21 22 8 LOOP 24 9 OK 5 10 BACK i PAGE 8 MENU 11 14 SAT 6 TV/ RAD 4 PAGE 18 SUB 7 3 FAV TEXT 2 19 17 AUDIO AV 13 1 4 2 3 5 8 0 6 9 20 7 PART 1 English Thank you for choosing this Strong satellite receiver. This receiver is of our latest development and it is designed to be capable of safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 6160 PDR Digital Satellite Receiver with integrated Hard Disk and its related accessories. We recommend both first-time- and experienced users read this manual in order to safely install the receiver. Strong has supplied this product with the most recent innovations of software and hardware. [. . . ] If you want to change any of these two settings you must set "LNB type" to zero. If DiSEqC switch is Off, you will not be able to change settings in both the "DiSEqC Input" and "DiSEqC Repeat" menu items. Alternatively if you set LNB Dish to "Moved", the DiSEqC switch menu item is automatically switched to off if your "LNB dish" is set to "fixed" you will be able to select the required DiSEqC level in the DiSEqC switch menu item. Press the RED (Save) button or press the GREEN (Save &Exit) button to save the setting and to return to the installation menu. Press the YELLOW (Back) button or BACK button if you don't want to save the setting. 5. 1. 4. 4 Channel Set-up (Please see inside cover Screen 20) The channel set-up is for downloading the channels available on the satellites. To download channels, please apply the following steps (In this menu, you can edit the satellites name, and edit the transponder of the satellite. You can also display the LNB menu and the Positioner Set-up menu by selecting LNB and Dish Position respectively. ): 1. Press the MENU button. Using UP/DOWN keys on your remote, select "Installation" and press OK. Using UP/DOWN keys, select "Channel Set-up" and press OK. 23 PART 1 English 4. Use the UP/DOWN keys on your remote to select an item and use the LEFT/RIGHT button to set up any values. The satellite list is displayed and then you can choose a satellite from which you want to download your channels from by pressing OK. (Please see inside cover Screen 20) Tip: If you want to rename the satellite, press the button on the remote control when you are in the list of satellites. If you want to set LNB related values, press OK and the LNB Set-up menu (Described in section 5. 1. 4. 3) will be displayed. Dish Position: Select "Dish position" and press OK or the Right button. When you use a DiSEqC 1. 2 positioner, you can select dish position in this field. "Positioner Set-Up" Frequency: Select "Frequency" and press OK. The functions of the colored buttons are switched to represent other functions. Press the BACK button to return back to the "Channel Set-up" menu. Scan Mode: Designate channels scanning whether "FTA" (Free to Air) only or "All" channels (including scrambled channels) Network Search: Set this field to "On" to perform Network TP Search. 24 PART 1 English The Scan options: At the bottom of the screen you will find the four colored buttons, each button represents a specific "scan" function: AutoScan (RED Button): This function searches all the transponders of a satellite. Scan (GREEN Button): "Network Search" Performs network search for a transponder. TP Scan (YELLOW Button): Search channels from current specific transponder. PID (BLUE Button): You can search a specific channel by entering the PID value of a channel. [. . . ] Enter a time mark in Hours, Minutes or Seconds. 25. 37 PART 1 English A. 1 Trouble Shooting Occasionally receivers can hang-up (just like with a PC) so you are recommended to reset the receiver by disconnecting it from mains power. Wait 30 seconds and connect to mains power again and now check if the unit is working as expected. If the receiver does not work properly after checking the trouble shooting section, please contact the dealer. Don't open the receiver cover, it may cause an electrical shock due to high current voltage and the warranty of your receiver will be void if the receiver has been Symptom Cause Solution Check that the power cord is plugged into the wall outlet Check if the TV is switched on and set your TV to the correct EXT/ AV or UHF channel The green/red lights on front The power cord is not panel do not light up plugged in No picture and sound TV is set to wrong channel No picture and sound Problem in cable connections Check if the scart and/or RF cable is conbetween receiver and TV nected correctly to the TV and to the back of the receiver Receiver "hang-up" Switch off receiver; disconnect the main power cord of the receiver from the 220 V main power. [. . . ]