User manual STRONG SRT 6200

[. . . ] Digital Satellite Receiver SRT 6200/SRT 6202/SRT 6205 User Manual 1. 00 SRT 6202/6205 SRT 6205 Picture similar PART 1 · English TAblE of ConTEnTS 1. 0 InTRoDUCTIon 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Accessories 1. 5 Usage of external USB devices 2. 0 YoUR RECEIvER 2. 1 Rear Panel 2. 2 Remote Control Unit 2. 3 Default PIN code: 0000 3. 0 ConnECTIonS 3. 1 Basic connection with SCART cable 3. 2 Connecting to Satellite Dish 3. 3 Connecting USB device 4. 0 STARTIng UP 4. 1 Language Selection 4. 2 Select Satellite 4. 3 Antenna mode 5. 0 MAIn MEnU 5. 1 Channel Organiser 5. 2 Installation 5. 3 System setting 6. 0 WATChIng Tv AnD lISTEnIng To ThE RADIo A. 1 TRoUblE ShooTIng A. 2 SPECIfICATIonS 2 2 2 3 3 3 3 3 4 5 5 5 5 5 5 5 5 6 6 6 7 8 11 13 14 STRong declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; RohS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners. from French wired line 1 English PART 1 · English 1. 0 InTRoDUCTIon 1. 1 Safety Instructions Do noT InSTAll YoUR RECEIvER: n a closed or poorly ventilated cabinet; directly on top of or under any other equipment; In on a surface which might obstruct the ventilation slots. [. . . ] If mode is Free+Scrambled, all channels from the selected satellite will be added. The Blind scan function is useful when scanning a newly added satellite. Please note that Blind scan will take more time than the normal scan process. 7 English PART 1 · English Use blUE to set the scan type to NIT OFF or NIT ON if Blind Scan is set to OFF or to Quick Search or Detail Search if Blind Scan is set to ON. Once set-up is completed, press RED to start the scan. 5. 2. 3 Manual Scan In Manual Scan you can scan a single transponder, add a new transponder, edit or delete a transponder. Add Transponder: Press gREEn, the Add Transponder sub-menu will appear. Edit Transponder: Press YElloW, the Edit Transponder sub-menu will appear. Use tu to select oK, press oK to confirm. 5. 3 System setting Use this menu to configure system settings, such as Language Setting, OSD Style, Parental Control, TV Settings and Time Setting. 5. 3. 1 Preference 5. 3. 1. 1 language Setting Use this option to change the language of the OSD, preferred audio and subtitles. Press oK or u to enter the language list and use pq to select the language. Press oK to confirm. 5. 3. 1. 2 Tv settings Use this option to set the TV mode, Screen mode, Video output and Modulator settings*. Use tu to change the settings and press oK to confirm or EXIT to cancel the settings. * only SRT 6205 5. 3. 1. 3 Time Settings If a broadcaster provides GMT, you can set the time using GMT or set the time manually. To set the time value manually, move the cursor to the time item and use the numeric buttons on the remote control. 8 PART 1 · English 5. 3. 1. 4 Auto Standby This option allows you to set the desired Auto Standby time or to disable Auto Standby. Auto Standby will switch the receiver to standby automatically when it doesn't receive commands from the remote control for a given period of time. To avoid the automatic switch off, set Auto Standby to Disable. 5. 3. 1. 5 Set factory Default Please be careful when using this function, as it will erase all the data and parameters you may have set earlier. Once you set the factory default you will have to re-install your preferences and re-scan channels. To reset your receiver to factory default, apply the following steps: Select Set Factory default and press oK. The receiver will return to its factory default state and all user data will be deleted. note: IYour PIN code will change back to the factory setting "0000". 5. 3. 2 oSD Style Use this menu to set the Menu Colour, Transparency Level and Border Pattern. 5. 3. 3 Parental Control Use this menu to set Channel lock status (ON or OFF), the Menu lock status, Parental setting and Change PIN code. If lock is ON, a locked channel can only be watched after entering the parental PIN. Menu Lock Press oK to select whether the menu should be locked or not (YES or NO) and press oK to confirm. If the menu lock is ON, some operations such as search program and set factory default can only be accessed after entering the PIN. [. . . ] To change channel list to favourite in normal viewing mode, press fAv. Now select the desired channel and press oK to switch to full screen mode. To select another favourite group or to exit from favourite channel list mode, press fAv. Select group "NO fAv" and press oK to exit from favourite channel list mode. 6. 5 Selection Audio language Press AUDIo to select the audio language. [. . . ]