User manual STRONG SRT 6300W - SRT 630WS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual STRONG SRT 6300W - SRT 630WS. We hope that this STRONG SRT 6300W - SRT 630WS user guide will be useful to you.


STRONG SRT 6300W - SRT 630WS : Download the complete user guide (3112 Ko)

You may also download the following manuals related to this product:

   STRONG SRT 6300W - SRT 630WS (3110 ko)
   STRONG SRT 6300W - SRT 630WS BROCHURE (981 ko)
   STRONG SRT 6300W - SRT 630WS BROCHURE (880 ko)
   STRONG SRT 6300W - SRT 630WS BROCHURE (945 ko)
   STRONG SRT 6300W - SRT 630WS BROCHURE (905 ko)
   STRONG SRT 6300W - SRT 630WS BROCHURE (973 ko)

Manual abstract: user guide STRONG SRT 6300W - SRT 630WS

Detailed instructions for use are in the User's Guide.

[. . . ] Digital Wireless Satellite Receiver with Digital Recorder SRT 6300 W Digital Wireless Satellite Receiver SRT 630 WS User Manual SRT 6300 W SRT 630 WS Picture similar TABLE OF CONTENTS 1. 0 INTRODUCTION 1. 1 Safety Instructions 1. 2 Storage 1. 3 Equipment Set-up 1. 4 Introduction 1. 5 Features & Accessories 2. 0 YOUR RECEIVER 2. 1 Master SRT 6300 W Front Panel 2. 2 Master SRT 6300 W Rear Panel 2. 3 Slave SRT 630 WS Front Panel 2. 4 Slave SRT 630 WS Rear Panel 2. 5 Remote Control 3. 0 INSTALLATION 3. 1 Master SRT 6300 W 3. 2 Slave 3. 3 Wireless Network Configuration 4. 0 QUICK START 5. 0 MENU OPERATION 5. 1 Main Menu 5. 2 Channel Organizer 5. 3 Favourite Organizer 5. 4 Timer Setup 5. 5 Installation 5. 6 Media Base 5. 7 Media Base Management 5. 8 Media Base Transfer 5. 9 Common Interface (Master Only) 6. 0 FUNCTION GUIDE 6. 1 Channel List 6. 2 Information Box 6. 3 EPG (Electronic Programme Guide) 6. 4 Subtitle 6. 5 Teletext 6. 6 Sound Track 6. 7 Time Shifting 6. 8 Recording 3 3 4 4 4 5 6 6 6 7 8 8 10 11 13 15 17 17 17 18 19 20 21 28 29 29 30 31 31 31 32 32 32 32 33 33 1 6. 9 Play Files 6. 10 Stop 6. 11 Pause 6. 12 Slow Motion Playback 6. 13 Fast Forwarding and Rewinding 6. 14 Bookmark 6. 15 Repeat 6. 16 Picture In Picture (PIP, Master Only) 6. 17 Keyboard 7. 0 TURN OFF SYSTEM 7. 1 Master 7. 2 Slave 8. 0 SOFTWARE UPDATE 9. 0 SPECIFICATIONS 9. 1 Master 9. 2 Slave 10. 0 TROUBLESHOOTING 34 34 34 35 35 35 36 36 37 38 38 38 38 39 39 40 42 2 1. 0 INTRODUCTION 1. 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: n In a closed or poorly ventilated cabinet; directly on top of or under any another equipment; on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: n To direct sunlight or near any other equipment that generates heat; to rain or intense moisture; to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc n Do not use a damaged power cord. It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards. Your warranty will be void if the receiver has been opened n When the receiver is not used for a long period of time, you should unplug the power cord from the wall socket n Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, only after disconnecting from the mains voltage supply. [. . . ] If you choose USALS, then press the [OK] button to enter USALS Setup menu. Channel Setup To go to Channel setup menu directly from LNB setting menu press the [OK] button. 5. 5. 4 Channel Setup (Master Only) Satellite Press [OK] button to display the Satellite List. Select one of the pre-programmed satellites that correspond to the satellite dish. If the desired satellite name is not in the list, select "Other". The Auto mode enables you to search using the information the Master has. On the other hand, you may need to know in advance the frequencies and the symbol rates when you use transponder mode. When you use the Network mode, the NIT (Network Information Table) is available, the Transponder's information can be found. Frequency Select or enter the Transponder's Frequency by using the numeric buttons on your remote control. 24 Polarization Choose the type of polarisation, either the Horizontal or the Vertical. Symbol Rate Enter the Transponder's Symbol Rate by using the numeric buttons on your remote control. Scan Mode You can select only searching free channels or all channels (included scrambling channels). Start Search To start the searching process, press [OK] button at "Start Search". To stop the searching progress on the way, press either the [MENU] button or the [EXIT] button. All channels found will be listed in two columns on the screen with TV channels in one column and Radio channels in the other. When the search process is completed, the screen will show how many TV and Radio channels have been found. Note: When Master finishes searching, Slave(s) will get automatically an update of the Channel List. LNB Setup To go to the LNB Setup menu directly from Channel Setup menu, press the [OK] button. 25 5. 5. 6 DiSEqC Setup (Master Only) Satellite You can not change the satellite here. Installer mode: The movement is adjustable by East, West commands (continuous movement). Movement User mode: Installer mode: Select how many steps you want the dish to move. Move the dish continuously. Motor Control n Goto: n Reset: n Limit OFF: n Limit W: n Limit E: n Goto Ref: n Store: Move the motor to the stored position of the selected satellite. Reset all the stored positions of the motor relative to the "0" position. Store the current position of the motor for the selected satellite. Up One Level Go back to the LNB setup by pressing the [OK] button. 5. 5. 7 USALS Setting (Master Only) USALS is a very convenient motorized DiSEqC system that supports DiSEqC 1. 3 commands and can also get the satellite position automatically if you now your geographical location. [. . . ] www. strong. tv With this menu (only Master), you can update your firmware via USB stick. Download the update software from the website and copy the file onto a USB stick. Plug the USB stick into the USB connector behind the flap on the front of the Master 4. Press the [OK] button to enter USB and select the update file, then press Update [RED] button to start updating. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE STRONG SRT 6300W - SRT 630WS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual STRONG SRT 6300W - SRT 630WS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.