User manual STRONG SRT 6505

[. . . ] Digital Satellite Receiver with Embedded CryptoWorks SRT 6505 User Manual Picture similar Safety Instructions SAFETY INSTRUCTIONS Grounding, Polarization -- If this product is used with a specified AC adapter, the adaptermay be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to fit, contact an electrician and have the receptacle replaced n Protecting the Power Cord -- The power supply cord should be placed so it will not bewalked on. [. . . ] choose from the list of satellites selected in "Antenna setup" menu. Main options are: receiver will search channels according to stored list of transponders. This mode allows you to find all channels, even from new appeared transponders. Satellite Name: Tune Method: "Sat" ­ "Sat ­ NIT" - receiver will search channels according to stored list of transponders and in addition use network information. "TP" ­ this method is to search channels from one transponder. 10 PART 1 · English "TP ­ NIT" ­ receiver will search channels from one transponder and in addition use network information. This mode recommended if you want to search channels of particular broadcaster only. Sub options are: "Free" ­ "Free+Scr" ­ Transponder: Frequency: Symbol Rate: Polarity: FEC: Function: AGC Signal: receiver will search only Free To Air channels select index from the stored list value of transponder frequency in MHz value of symbol rate in kSymbols Per Second Horizontal / Vertical / Right / Left Auto, 1/2, 2/3, 3/4, 5/6, 7/8 Append/Delete/Change Indicates received signal strength level English 11 receiver will search for all channels 8. 2. 3. 1 How to search for channels: Highlight "Tune method" field and press OK. Names of the found channels will be shown in the two columns: for TV and Radio separately. If you press OK button: search process will be interrupted and you can select one of the following options: n n Save ­ to save all found channels Unselect ­ to unselect some unwanted channels from the list. Use OK button to unselect channels and VOL t/u buttons to switch between TV and Radio list. Once you finish ­ press EXIT button, select "Save" and press OK. Only selected channels will be stored in the memory n Cancel ­ to cancel result of search. No channels will be stored in the memory If you press EXIT button: search process will be interrupted and no channels stored in the memory. 8. 2. 3. 2 How to add new transponder: n n n n n n set "Tune method" to "TP" or "TP+NIT" move focus to "Frequency" and enter value in MHz move focus to "Symbol rate" and enter value in kSPS move focus to "Polarity" and select value move focus to "FEC" and select value or set "Auto" move focus to "Function" select "Append" and press OK. New transponder will be added to the end of the list 8. 2. 3. 3 How to delete present transponder: n n n set "Tune method" to "TP" or "TP+NIT" move focus to "Transponder" and choose transponder you want to delete move focus to "Function" select "Delete" and press OK. Selected transponder deleted from the list 8. 2. 3. 4 How to correct/edit parameters of the transponder: n n n n n n n set "Tune method" to "TP" or "TP+NIT" move focus to "Transponder" and choose transponder you want to modify move focus to "Frequency" and enter value in MHz move focus to "Symbol rate" and enter value in kSPS move focus to "Polarity" and select value move focus to "FEC" and select value or set "Auto" move focus to "Function" select "Change" and press OK. Press EXIT to go back to the previous mode. n PART 1 · English 8. 2. 4 Setup Lock/PIN Press OK on `Setup Lock/PIN' in the Setup Menu. Set the Menu Lock, Change the PIN, enter the New PIN and confirm the Confirm PIN. n n Use CH p/q to move up and down the list. Enter your new 4-digit code The default PIN is `1234' Menu Lock: Change PIN: New PIN: Note: Confirm PIN: Confirm your new 4-digit code Press EXIT to go back to the previous mode. Set the Local Time, Sleep Time, Timer Status and Program the Timer. n n Use CH p/q to move up and down the list. if you want to correct time and date then enter in format dd/mm/yyyy - day ­ hh:mm 0 ~ 180 min. If Enabled ­ receiver will be turned on within selected channels at defined "start time" and turned off after "duration" interval TV/Radio. If you use multi satellite installation ­ make sure to enter channel number in "All satellites" mode. [. . . ] 8. 4. 7 Teletext Press TXT to access the Teletext service if available from the broadcaster. A. 1 TROUBLE SHOOTING Occasiona power, wait 30 seconds and connect it to mains power again and check if the unit is working as expected. If the receiver does not work properly after checking the trouble shooting section, please contact the dealer. Don't open the receiver cover, it may cause an electrical shock due to high current voltage and the warranty of your receiver will be void. Symptom not light up No picture and sound Cause switch on rear panel is switched OFF. [. . . ]