User manual STRONG SRT 8900

[. . . ] Digital HD Terrestriell Mottaker SRT 8900 User manual Picture similar Introduction Copyrights © 2008 Strong A/S. Republication or redistribution of Strong content, including by framing or similar means, is prohibited without the prior written consent of Strong A/S. The Strong logo is registered trademark and trademark of Strong A/S. Other trademarks and technology protection HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. [. . . ] Advice: to display information on the next programme on the selected channel, press the t arrow key. EN To escape the zapping/information banner: 3. Press the INFO key a third time or the EXIT key once. Using the Mini-Guide Thanks to the Mini-Guideyoucanviewwhat'sonotherchannelswithoutchangingchannel. To use the mini-guide: 1. Advice: to switch to a current programme on another channel, select the channel and press the OK key. EPG TheElectronicProgrammeGuide(EPG)allowsyoutoviewwhat'sonallchannelsupto7daysinadvance and to programme a timer. To use the guide: Press the GUIDE key once. To switch to a current programme broadcasted on another channel, highlight the programme using the arrow keys and press OK. To set a timer to a programme that will be broadcasted later on, highlight the programme using the arrow keys and press OK. To get more information about a programme, highlight it and press the INFO key. To escape the guide: ToexittheEPG, presstheGUIDE key again. 11 Menus Charts of the menu On/off, alarm time, timer list. Menu language, audio and subtitle preferences. Check whether a new software version is available on air. Restore factory settings. Informationonthedecoder(usageidetc. . ) Signal power and quality. For detailed information about channels, electronic programme guide, timers and some setup parameters consult the following pages. 12 Channel list This menu gives access to all lists of channels: the All TV list and your favourite lists. You can view list content and modify the currently viewed list. Access to the list of channels 1. Advice: For a direct access to the Channel list, press the LIST key on your remote. EN View list content To view the content of a list, highlight it using the s and t keys and press the OK key. To navigate through the channel list, use the s and t keys. To switch to a channel you want to watch, highlight the channel using the s and t keys and press the OK key The list will automatically be set as current. To scroll one page down/up in the channel list, use the P+/P- keys. Set a list as current To set a list as current, highlight the list using the s and t keys and press INFO. Note: The focus is automatically set on the currently viewed list. Exit the Channel list Toexitthesub-menulistofchannels, pressthe LIST key again. Channel list update Duringthefirstinstallation, theset-topboxsearchesforchannelsinthenetwork. Iflaternewchannels aremadeavailableorarerenamed, suppressedorchanged, theset-topboxwillautomaticallyupdatethe All Channels list. 13 Channel organizer Thechannelorganizerallowstocreatefavouritelistsandmodifythedifferentlists:rename, reorderor remove a list, add/remove channels, lock/unlock channels etc. . . Access to the channel organizer 1. Using the s and t keys, select Channel organizer then press OK. Create a new list To create a new favourite list, highlight Create a new list using the s and t keys and press OK. The new list is automatically added to your current lists. Modify/delete a list To modify or delete a list, highlight it using the s and t keys and press OK. Then use the OK key to add or remove the selected channel from the favourite list. Then use the OK key the lock or unlock the selected channel from the favourite list. Select the channel you want to reorder in the list using the s and t keys. Use the s and t keys to move the channel at your preferred position in the list. To confirm the list removal, press the s key once then press OK twice. Press the green key to save your settings. Exit the channel organizer Toexitthechannelorganizer, presstheMENU key again. 14 Setup Languages Themenu, audioandsubtitlelanguagescanbesetinNorwegian, Swedish, Danish, Finnish, English(ifthe correspondingtrackexist). Access to language settings 1. Using the s and t keys, select Setup then press OK twice. EN Modify a language 1. Press the C and B key to confirm a language. Exit the language settings menu Toexitthelanguagesettingsmenupressthe MENU key again. Decoder PIN The Decoder PIN sub-menu allows changing PIN code and lock/unlock the decoder. Access to decoder PIN 1. Enter your 4-digit PIN code. Change decoder PIN code ertainfeaturesoftheset-topbox(e. g. decoderlock)requiretheentryofaPersonalIdentification C Number(PIN). Thedefaultnumberforthisis1234. Itishighlyrecommendedthatyouchangethis number. [. . . ] Suggested solution Make sure that the mains plug is properly plugged in and that the mains supply is switched on. on the front panel or on your Press remote control. EN Yourset-topboxis switched off. Yourset-topboxisnot correctly connected to your other equipment, or your other equipment is not correctly set up. Something is between the remote control and your set-topbox. Check that all the connections are properly made(seepage6). Check that your TV is plugged into the mains and that it is switched on. [. . . ]