User manual SUPERTOOTH ONE

[. . . ] From OFF, press and hold MFB (1) for 6 seconds until the Bluetooth Indicator (3) turns blinking red/blue. A voice will then announce, "Press green button to select British English. " Instructions for other languages will be announced succeedingly. As soon as the preferred language is spoken, press the green button or MFB (1) to enable it. If British English is chosen, a voice will announce "British English selected. [. . . ] IMPORTANT NOTICE: Some Symbian phones do not support automatic Phonebook downloading. Please refer to manual or press red button to cancel phonebook transfer. " will be announced then proceed to Section F to transfer the phonebook manually from the phone menu to the kit or press red button or End/ Reject Button (2) of SUPERTOOTH ONE to connect the kit to the phone without phonebook transfer. Important Note: Most phones automatically connect to the kit after pairing. Go back to Bluetooth > Paired devices > highlight ST ONE > press Options > then press Connect. When a call is received on your mobile phone, the name of the incoming caller will be announced on the kit. F. Automatic Transfer Not Supported By Phone If automatic transfer of phonebook failed, you can send or transfer the contacts to the SUPERTOOTH ONE by sending them via Bluetooth. IMPORTANT: This procedure will only work right after pairing or right after phonebook update (see Sections E and G respectively). There are two ways to proceed with the procedure depending on your phone model. Note: Choose "Mark all" (if this option is available in your phone) to be able to send all contacts at one time. However, there are phones that do not support sending all contacts at one time. Choose to send the contacts via Bluetooth > select ST ONE Note: On some phones, SIM contacts transfer is impossible. The voice tag will be played back to you and then the phone will dial the number automatically. Redial (For Handsfree Profile Phones only): Press MFB (1) for 3 seconds. The last dialed number will be redialed and "Redialing" will be announced on the kit. Reject a Call (For Handsfree Profile Phones only): During the ring tone, press End/Reject Button (2) for 1 second. The incoming call will be rejected and "Call rejected" will be announced on the kit. Volume Setting: Increase or decrease the volume by pressing the Volume Up (8) or Volume Down (7) button. The Bluetooth Indicator (3) will turn violet as lowest and highest levels are reached. When maximum volume is reached, "Maximum Volume" will be announced on the kit. Audio Transfer (For Handsfree Profile Phones only): During an ongoing call, you can transfer the audio. Kit to Phone: Press and hold MFB (1) for 3 seconds and the audio will be transferred to the phone. Phone to Kit: Press MFB (1) for 1 second and the audio will be transferred to the kit. Note: For some phones, you may need to accept any connection prompt on the phone before automatic transfer takes place. J. [. . . ] Connecting to the wanted phone by using the "Paired devices" in the Bluetooth menu of that wanted phone. Note: Reconnection to a paired phone can also be done by pressing the MFB (1). However, the SUPERTOOTH ONE will attempt to connect to the last used phone only. Therefore, it is recommended to connect to another paired phone using the phone menu. [. . . ]