User manual SUPERTOOTH VOICE

[. . . ] Connected to phone (or if phone not available: No phone detected). " Note: The first time the SUPERTOOTH VOICE is switched on, the language selection is automatically activated. Power Off: Press and hold MFB (1) for 5 seconds until a voice announces, "SUPERTOOTH VOICE powering There are 6 languages featured in this kit. They are British English, American English, French, Italian, Spanish and German. [. . . ] Choose to send the contacts via Bluetooth > select ST VOICE Note: On some phones, SIM contacts transfer is impossible. Choose Bluetooth > Highlight ST VOICE > press Key > Choose Transfer Address Book. After a few seconds, the phone will display "Data sent" or the kit will announce "SUPERTOOTH VOICE ready. Connected to phone. " For some phones, you may need to accept any connection prompt on the phone before reconnection takes place. The kit is now ready to use. When a call is received on the user's mobile phone, the name of the incoming caller G. Phonebook Update If you renamed or added a contact in your phone, you can refresh the phonebook of the SUPERTOOTH VOICE in order for the kit to recognize the change. Note: Some phones display a question or request on the phone screen before it allows the kit to download the phonebook. Just accept any request (Connection. . . ?, allow Internet access. . . ?, DUN. . . ?). The number of contacts will be announced while the download is ongoing. IMPORTANT NOTICE: Some Symbian phones do not support automatic Phonebook downloading. Please refer to manual or press red button to cancel phonebook transfer. " will be announced then proceed to Section F to transfer the phonebook manually from the phone menu to the kit or press red button or End/Reject Button (2) of SUPERTOOTH VOICE to connect the kit to the phone without phonebook transfer. Installation Attach the magnetic back of SUPERTOOTH VOICE to the fixed metal clip. The SUPERTOOTH VOICE must be placed in such way that its microphone is directed to the mouth of the user. I. Basic Operations IMPORTANT: The kit needs to be `paired' to your Bluetooth mobile phone first, before you can use the following functions. During an ongoing call, the Bluetooth Indicator (3) will turn steady blue. Note: With some phones like Siemens S55 and Panasonic X70, audio is always on the phone during an outgoing call. You will need to press the MFB (1) for 1 second to transfer the audio to your kit. [. . . ] Disconnecting the currently used phone using the "Active devices" in the Bluetooth menu of that phone. Connecting to the wanted phone by using the "Paired devices" in the Bluetooth menu of that wanted phone. Note: Reconnection to a paired phone can also be done by pressing the MFB (1). [. . . ]