User manual TAURUS HOME AC 293

[. . . ] - The appliance requires suitable ventilation in order to work properly. Leave a space of 50cm between walls or other obstacles - Do not cover or obstruct the sides of the appliance, and leave a minimum space of 50cm front other walls, ceiling. - Ensure that the voltage indicated on the rating label matches the mains voltage before plugging in the appliance. - Connect the appliance to a base with an earth socket withstanding a minimum of 10 amperes. [. . . ] - Respect the legal provisions concerning safety distances from other elements such as pipes, electrical connections, etc. - The appliance requires suitable ventilation in order to work properly. (Fig 1) - Do not cover or obstruct any of the openings of the appliance. - Do not cover or obstruct the sides of the appliance, and leave a minimum space of 50cm front other walls, ceiling. - The plug must be easily accessible so it can be disconnected in an emergency. Indb 22 22/01/2016 14:25 English - To achieve the highest efficiency from the appliance it should be situated in a place where the atmospheric temperature is between 12 and 32ºC. Wall mounted Bow alignment Installation of window kit (included on the model AC 293 KT) - Partially open the window and then fix the window kit to the window. - The window kit can be installed on most of normal and vertical windows and it is adjustable. - Fix the other end of the heat-exhausted hose to the air-outlet window kit. Size: 130cm Incorrect bending - Do not add new sections to the extraction tube provided, as it could cause the appliance to malfunction. - The length of exhaust pipe is especially designed in accordance with the specification of the air conditioner. Please do not use other exhaust pipes of different lengths or materials, in such way failure may be caused. Instructions for use Use: - Unroll the cable completely before plugging it in. - Press the ON/OFF button, the unit will enter in cooling mode with low fan speed. - Press the mode button to select cooling dehumidifying , fan and heating mode. Fan Speed - Under the cooling and the fan mode, the speed goes as follow: - Lower Fan Mid Fan-> High Fan. - Setting of timer off - When the air conditioner is running, press this button, the timer LED lamp is on, and meanwhile 88 Nixie tube will flicker “ ” for 5 times, at the moment, press UP and DOWN to adjust time from 0. - When the set time expires, the air conditioner turns off automatically 2. Setting timer on - When the air conditioner is in standby state, press TIMER, the timer LED lamp is on, and meanwhile 88 Nixie tube will flicker “ ” for 5 times, at the moment press UP/DOWN to adjust the desired time, and the method of adjustment is the same as that during timer off. - During setting of timer, the operating modes after start can be selected, if COOL mode is selected, the set temperature can be adjusted simultaneously. - If DEHUMIDIFY mode is selected, the set humidity can be adjusted simultaneously. - After the set time expires, the air conditioner starts automatically and runs in the selected operating mode. [. . . ] - Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry. - Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance. - Never submerge the appliance in water or any other liquid or place it under running water. - If the appliance is not in good condition of cleanliness, its surface may degrade and inexorably affect the duration of the appliance’s useful life and could become unsafe to use. [. . . ]