User manual TECHNICS SL-PG540A service manual

[. . . ] But the discs might not be able to be played/recorded properly depending on the combinations of the discs and CD-Recorders. 1 CD Recordable Audio (record once): Fully recorded and subsequently finalized audio CD-R discs can be played on CD players and recorders that are suitable for CD-R discs. A CD-R disc can be recognized by the following logo: Unpacking First check the contents of the packaging. It should contain the following: - CD-Recorder SL-PG540A - Remote control with batteries packaged separately - Audio cables (2 - with red and white plugs) × 2 - Digital coax cable (with black plugs) × 1 - Remote control cable (with orange plugs) × 1 - Instructions - Guarantee If one of these components is missing, please inform your supplier immediately. [. . . ] · If message also flashes, the digital connection is incorrect. 5 Set the optimal recording level on the CD-Recorder. q Play the source first to set the optimal recording level on the CD-Recorder. w Rotate the EASY JOG (12) key until, on the Record/Play Level bar, all the white segments are alight, but the red segments do not light continuously during the loudest passages. DIGITAL RECORDING : +6dB ~ ­63dB ANALOG RECORDING : 0dB ~ ­63dB e Stop the source. About Auto Track increment · · When Auto Track is ON (default setting), track numbers will automatically be increased during recording. If you wish to increase track numbers manually, press TRACK INCR(ement) on the remote control. ON (AUTO): The track increments are automatically taken over from the digital source material or after 2. 7 seconds silence during analog recording. OFF (MANUAL): Track numbers can be incremented manually by pressing TRACK INCR (ement) (54) on the remote control. (Minimum track length is 4 sec. ) · Track numbers cannot be changed after recording. 6 To start recording, press 0 REC (13) on the CD-Recorder and immediately start the source (from Stopmode). · To record a 3-second silence at the start of a track, press 2/; PLAY/PAUSE (16) on the CD-Recorder before starting the source. · To check the elapsed recording time, press DISPLAY (58) on the CD-Recorder. (This can also be done during the recording. ) 7 To stop recording, press 9 STOP (17, 68). · If 9 STOP (17, 68) was pressed within 3 seconds after 0 REC (13), no recording will take place. · To interrupt recording, press 2/; PLAY/PAUSE (16) or ; PAUSE (63). Play skips to the beginning of the selected track. 5 To stop play, press 9 STOP (17, 68). The number of tracks and the total playing time appear on the display. 3 On the remote control <ii>. Press S (61) or T (69) one or more times. Play skips to the beginning of the present, previous or subsequent tracks, including tracks on other disc. (Changer mode only. ) Selecting a track when CD play is stopped 1 On the SL-PG540A recorder. q Turn the EASY JOG (12) key until the required track number appears on the display. w Press PUSH ENTER (12) to confirm or press 2/; PLAY/ PAUSE (16) to start playing. 2 On the remote control <i>. q Key in the required track number using the NUMERICAL (57) keys. Play starts. 3 On the remote control <ii>. q Briefly press S (61) or T (69) one or more times. w Start playback by pressing 2 (60) or ENTER (65). 13 SL-PG540A(U)_Eng_P11-21. p65 13 8/7/00, 1:37 PM ENGLISH PLAYING PLAYING The numbers between parentheses refer to the fold-out. EX: Search TRACK INCR. ENGLISH EX: Repeat play TRACK INCR. q REC TYPE REW FF STOP PLAY/PAUSE SCAN REPEAT PROG. RANDOM SCAN REPEAT PROG. RANDOM ABC DEF GHI 1 JKL 2 MN 3 OPQ 4 RST 5 UVW 6 XYZ 7 DISPLAY 8 SPACE 9 SCROLL q w ABC DEF GHI 1 JKL 2 MN 3 OPQ 4 RST 5 UVW 6 XYZ 7 DISPLAY 8 SPACE 9 SCROLL 0 FUNCTION 0 FUNCTION CDR EASY JOG LEVEL PHONES CD REC ERASE STORE MENU CANCEL DELETE FINALIZE q w CDR CD - + PUSH ENTER w MENU/ STORE ENTER CANCEL/ DELETE MENU/ STORE ENTER CANCEL/ DELETE ww REMOTE CONTROLLER RC6050DR REMOTE CONTROLLER RC6050DR Scan play 1 To start scan play, press SCAN (55) on the remote control. - It automatically stops after playing all tracks. Repeat play 1 Press REPEAT (56) one or more times during CD play. When REPEAT TRACK lights up, the current track plays repeatedly. When REPEAT ALL lights up, the disc or program plays repeatedly. 2 To stop playing, press 9 (17, 68). The SCAN level disappears from the display. Search ; 1 Press 2/; PLAY/PAUSE (16, 60). 2 Hold down Q (19, 62) or R (18, 67). The player first searches backwards or forwards at 10 times normal speed with sound at low volume, then goes to 50 times normal speed with sound muted. 2 To return to normal play, press REPEAT (56) one or more times until: The REPEAT label disappears from the display. Note: - Repeat is also cleared if you open the disc tray. - REPEAT (56) button is only on the remote control. 3 Release the button at the desired passage. Play starts at the desired passage. Note: During Random, Repeat Track or Programmed play, search is restricted to within the track being played at the time. Random play 1 Press RANDOM (73) before or during CD play to start random play. The tracks on the CD (or program if set) play in random order. 2 Press RANDOM (73) again to return to normal CD play. Note: RANDOM is also cleared if you open the disc tray. - RANDOM button is only on the remote control. 14 SL-PG540A(U)_Eng_P11-21. p65 14 8/7/00, 1:37 PM The numbers between parentheses refer to the fold-out. Programmed play · · You can program up to 99 tracks to play in any desired sequence. [. . . ] Ariescommerce GmbH Lenbrook Industries Limited Empire Hifi systems Ltd. Audio International Audio Nord V. V. & SONS Solimco HiFi Club Estonia T. P. Corel2 Marantz Professional Products Marantz Professional Products Almana & Partners W. W. L. Marantz Spain The listening Room Audio Nord Sound Company AG Hamzeh & Partners Covecolor Pai-Yuing Co. [. . . ]