User manual TEFAL BI7625 MINI

[. . . ] Keep these operating instructions in a safe place and pass them on to any future user. ~ Before installation or service, disconnect the power supply to the work area by unplugging the unit, "tripping" the circuit breaker or removing the fuse. ~ Do not use an extension cord to connect this appliance to electricity. Extension cords do not guarantee the required safety of the appliance (e. g. , danger of overheating). ~ Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance continuity must exist between the appliance and an effective grounding system. If there is any doubt, have the electrical system of the house checked by a qualified electrician. ~ Only connect power to the appliance when all installation work is complete. 4 IMPORTANT SAFETY INSTRUCTIONS Installation This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. [. . . ] Check that the door has been closed properly. The refrigerator does The machine is not not get cold. The door is not closed. A large amount of food is This makes the compressor put in the refrigerator at run longer, causing the the same time. temperature to fall automatically. 29 Frequently asked questions Issue The compressor kicks on very frequently and for too long. The door has been opened too frequently, or a large amount of fresh food has been put in at once. Once the fridge gets down to the set temperature the compressor will turn off. Possible fault Solution Once the alarm condition has been corrected, the alarm will turn off and the "alarm" indicator will stop flashing. Issue The alarm is ringing and The door is not closed. There has been a power failure. 30 Frequently asked questions The appliance is making noises. This noise can get louder for brief periods when the motor is switching on. A gurgling noise can be heard when coolant is circulating through the pipes. Clicking sounds are made when the thermostat switches the compressor on and off. On multi-zone and frost-free appliances you can sometimes just hear the movement of air circulating inside the appliance. 1, 191 lbs (540 kg) To ensure that the appliance is installed securely and functions properly, the base must be flat, level and made of a hard, rigid material. If in doubt, contact Miele. Ventilation The air intake and outlet must not be blocked or covered in any way. They also need to be dusted/cleaned on a regular basis. Installation niche To ensure safe, trouble-free installation and the best possible cosmetic result, check to be sure that the installation space complies with the installation dimensions. The minimum thickness of the side walls and the top wall must be 5/8" (16 mm). The minimum thickness of the toe-kick panel must be ½" (13 mm). A thickness of 3/4" (19 mm) is recommended. Furniture/fixtures The new appliance will be mounted securely to adjacent and overhead furniture/fixtures. For this reason, it is essential that all attachable furniture/fixtures be connected securely to the floor or wall by a suitable means. 36 Installation Custom door panels This appliance is compatible with all styles and designs of kitchen cabinetry. The total weight of the decorative panel must not exceed the following: K 18X1 Vi . 81 lbs (37 kg) Side-by-side This appliance can be installed "side-by-side" with another fridge/freezer using a "Merging Kit". Contact Miele or your dealer for specific information about which combinations will work with your appliance. For instructions on how to attach the appliances and install the heating mat, please refer to the instructions included with the "Merging Kit", available from Miele. [. . . ] If you are in any doubt as to whether the appliance has been properly grounded, have the appliance checked by a qualified electrician or service technician. Installation, repairs and other work by unqualified persons could be dangerous. Before installing the appliance, verify that the voltage, load and circuit rating information found on the data plate match the household electrical supply. If there are any questions regarding the electrical connection of this appliance to the power supply, please consult a licensed electrician or call the Miele Technical Service. [. . . ]