User manual TOYOTA ECO26A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOYOTA ECO26A. We hope that this TOYOTA ECO26A user guide will be useful to you.


TOYOTA ECO26A : Download the complete user guide (2440 Ko)

You may also download the following manuals related to this product:

   TOYOTA ECO26A (2314 ko)
   TOYOTA ECO26A (2336 ko)

Manual abstract: user guide TOYOTA ECO26A

Detailed instructions for use are in the User's Guide.

[. . . ] 5 Part names. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part names and their functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Quick adviser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 How to operate foot controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Thread guide 6 3 the thread Pull down along the groove, and then pull it back up. 5 the thread Pull down along the groove. Check that the take-up lever is correctly threaded. Pass the thread in The thread the order shown. should be taut (3 through 5) and secure. Take-up lever 19 Using the needle threader Caution Before using the needle threader, use the main power switch to turn off the sewing machine. (Needle No 14/90 is included when the sewing machine is purchased. ) The needle cannot be threaded if the thread is too thick for the needle. For details on possible needle and thread combinations, refer to “Relationship between the needle, thread and fabric, and adjusting the thread tension” on page 29. zz Preparing to use the needle threader 1 Turn the handwheel towards yourself until the needle is in its highest position. ** If the needle is not in its highest position, the needle cannot be threaded. 2 Turn the pattern selection dial to “6” (straight stitch). ** Otherwise, the needle threader may not operate correctly and the needle may not be threaded. Check that the thread has been passed through the needle thread guide. Presser foot lever Needle thread guide zz Understanding the needle threader mechanism 1Lower The hook is within the guide. The hook passes through the needle, catches the Needle thread, then pulls the thread through the needle. Guide Hook 2Turn 20 zz Using the needle threader 1 While fully lowering the needle threader lever, hook the thread on the guide as shown in the diagram. Needle threader lever Guide 2 Sewing preparations 2 Fully turn the needle threader lever to the rear, and pull the thread through the needle threader slot. Needle threader slot 1 Slowly return the needle threader lever towards yourself as much as possible. 3 Release the needle threader lever while releasing the end of the thread. 50 Curtains Denim Quilting Fleece Tweed Felt, etc. 2 Sewing preparations Thread Fabric Normal front cloth Broad Soft denim Satin Pile Gingham, etc. -2 -1 +2 +1 +2 +3 +4 Upper thread tension dial -1 ~ -3 +1 ~ +3 zzFor SuperJ26/34 -1 ~ -3 -1 ~ +3 • Use a ball point needle for the sewing alignment of stretch fabric. • Please purchase any needles not included as accessories, after checking they are specified as home-use sewing machine needles. • The bigger the needle number is , the thicker the needle is, the bigger the thread number is, the thinner the thread is. • Normally, sew with the upper thread tension dial set to “ “ ” (for SuperJ26/34). ” (for XXX26C/XXX34C) / 29 3 Sewing Caution Do not pull the fabric excessively while sewing. Doing so could break the needle and cause an injury. Straight stitching and reverse sewing zz Straight stitch 1 2 Turn the handwheel towards yourself to raise the needle. Set the stitch length dial between “1” and “4”. Zigzag sewing foot (Originally attached to the sewing machine) 1~4 5 6 1 (For details on changing the presser foot, refer to “Changing the presser foot” on page 26. ) Position the fabric and lower the presser foot lever. Step on the foot controller to begin sewing. zz End of sewing 1 After sewing, turn handwheel towards yourself until the needle is in the highest position. Raise the presser foot and pull out the fabric to the rear. 30 zz Thread cutter „„For model XXX26C/XXX34C Line up the two threads, and cut them with the thread cutter on the presser bar. Thread cutter „„For model SuperJ26/34 Line up the two threads, and cut them with the thread cutter on the face cover. 3 Thread cutter Sewing zz Reverse sewing Reverse sewing is performed at the beginning and the end of sewing to prevent the thread from unraveling. [. . . ] • Part c on the bobbin case is to the left of part d on the sewing machine. Note: Carefully check the bobbin case since it may be incorrectly installed even though part c of the bobbin case is to the left of part d on the machine, as shown in the above diagram on the right. 46 Attach the needle plate with red mark a on the bobbin case positioned as shown in the diagram. 3 Check that the needle correctly enters the hole in the needle plate. ** If the bobbin case is not installed correctly, the handwheel does not turn smoothly. If this occurs, remove the needle plate and bobbin case, and attach them again. 4 Maintenance 47 Changing light bulb Warning Before changing the light bulb, use the main power switch to turn off the sewing machine, remove the power plug from the outlet, and then wait until the bulb cools. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TOYOTA ECO26A




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOYOTA ECO26A will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.