User manual TYPHOON WIRELESS MULTIMEDIA SET-40353

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] The LED indicator on the receiver will light. c) d) e) f) g) Press the ID Link Button on the receiver and the LED indicator will blink. The receiver is ready to automatically link (synchronize) with the keyboard and the mouse. Next press the ID Link Button at the back of the keyboard under the flipper leg. The LED light on the receiver will blink quickly when you have successfully completed the keyboard linkage. Then press the ID Link Button at the back of the mouse beside the label. The LED indicator on the receiver will light steadily while you have completed the linkage (synchronization process). The LED indicator of the receiver will blink when the keyboard or the mouse are in use. Version 2. 0 All specifications and information are subject to changes without further notices. 2 Typhoon Wireless Multimedia Set h) i) Article Number: #40353 j) If you need to re-link (synchronization) the mouse, and the keyboard or after changing the batteries, please repeat the above synchronization instructions. If the selected channel is interfered by other wireless-mouse or keyboard users nearby, please change the Link ID by re-linkage (synchronization) or select the other channel immediately. There are 256 changeable IDs for each channel so please re-synchronize to move to the next ID to prevent interferences. 3. Place the driver CD-ROM into the CD drive and the auto-run installation will start. If you have disabled "auto-run" feature on your CD drive, you can manually install by double-clicking on the file "Setup. exe" to start the installation process. The driver CD-ROM contains the drivers of both the keyboard and the mouse. Please select to install the keyboard driver or the mouse driver at the pop-up window. When asked to restart, select "later" and move on to install the mouse driver next. [. . . ] Battery Notice a) Before First use, please charge the batteries for at least 6 to 8 hours. b) The LED indicator on the scroll wheel of the mouse will light when the mouse battery is low in power. c) If the keyboard is low in battery power, the LED indicator on the keyboard will light when typing any key and a low-battery icon will also appear under the Window's taskbar. [. . . ]