User manual UNIVERSAL REMOTE CONTROL ATLAS 5-DEVICE

[. . . ] ATLAS DVR/PVR 5-DEVICE Universal Remote Control User's Guide Atlas DVD/PVR Manual 2/14/03 5:00 PM Page 2 TABLE OF CONTENTS Introduction. 31 To Unlock Volume Control For A Single Device (Individual Volume Unlock). 35 2 Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 3 INTRODUCTION The Atlas DVR/PVR 5-Device Universal Remote Control by Universal Electronics is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, it's packed with advanced features such as: · Preprogrammed control to operate the cable converter supplied by your cable service provider · Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder) · Programmable Master Power key for master on/off control of your home entertainment equipment with a single keystroke · Instant "Tune-In" keys for assignment to your favorite channels · Channel Lock to lock channel selection only to the cable converter · Volume Lock to lock volume controls to one mode or individual modes · Device Key Re-Assignment to remotely control a second (duplicate) device · Code Search to help program control of older or discontinued components · Color-coded keys to quickly locate popular functions · Code library for popular video and audio devices Before using the product, you will need to install the enclosed batteries and also perform some programming to operate the specific home entertainment devices you wish to control. Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new remote control and cable service. 3 Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 4 FEATURES AND FUNCTIONS Use the illustration below to locate features on the Atlas DVR/PVR 5-Device Universal Remote Control and then study the Key Charts (on the next three pages) to learn how they function. [. . . ] However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes. *NOTE: This feature does not affect the AUD mode. To De-Activate Channel Control Lock: 1. Then press and hold SETUP until the CBL key blinks twice, then release SETUP. Now, the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode. To Re-Activate Channel Control Lock: 1. Then press and hold SETUP until the CBL key blinks twice, then release SETUP. Now, regardless of what mode you select (except AUD), only the channel control capability of your cable converter will be accessible. 26 Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 27 PROGRAMMING ID LOCK The Atlas DVR/PVR 5-Device Universal Remote Control is locked at the factory to operate a Scientific Atlanta cable converter. However, if you have another brand or model of cable converter or satellite service that you would like to control, then you'll need to perform the following steps to unlock the ID Lock, enter in a new manufacturer's code, and lock the ID Lock again. Then press and hold SETUP until the CBL key blinks twice, then release SETUP. The CBL key will blink four times, indicating ID Lock is unlocked. 3. 4. Perform the instructions in Programming Device Control on page 10 to program device control for the desired cable converter or satellite receiver. Upon completion, perform the remaining steps (5 and 6 on this page) to again lock the ID Lock. Then press and hold SETUP until the CBL key blinks twice, then release SETUP. The CBL key will blink twice, indicating ID Lock is again locked. 5. 6. PROGRAMMING "TUNE-IN" KEYS FOR SPECIFIC CHANNELS The Atlas DVR/PVR 5-Device Universal Remote Control includes three "Tune-In" keys (located directly below the MUTE and LAST keys). Each can be programmed to remember three of your favorite cable channel settings for a total of nine channels. If you want to change the cable channels in a previously-programmed "Tune-In" key, you'll need to clear the key first (see next page). continued on next page. . . 27 Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 28 PROGRAMMING "TUNE-IN" KEYS FOR SPECIFIC CHANNELS (continued) To Program A "Tune-In" Key: 1. Then press and hold SETUP until the CBL key blinks twice, then release SETUP. Press CBL once followed by the channel number to be programmed (e. g. , 3 - 9). NOTE: If you are programming a channel for a Digital Cable Converter, you need to enter all channels in a 3-digit channel format. For example, if the desired channel is 39, then enter it as 0 - 3 - 9. 2. 3. 4. 5. Press and hold SETUP until the CBL key blinks twice, then release SETUP. To add another channel, repeat steps 1 through 4, substituting the new channel to be added in step 3. NOTE: Programming more than three channels on the same "Tune-In"key will overwrite previous settings. To Clear A "Tune-In" Key: 1. Then press and hold SETUP until the CBL key blinks twice, then release SETUP. Then select a "Tune-In" key you want to clear and press it once. Press and hold SETUP until the CBL key blinks twice, then release SETUP. This "Tune-In" key is now clear and ready for reprogramming (see above ­ To Program A "Tune-In" Key). [. . . ] The last-selected device key will blink twice. 2. 3. Select a mode (e. g. , TV) where you want to globally lock the volume controls. Now, when you press VOL+, VOL-, or MUTE, the volume of the selected device (e. g. , TV) can be controlled regardless of mode. 4. 32 Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 33 TROUBLESHOOTING PROBLEM: Device key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 9). PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control. [. . . ]