User manual UNIVERSAL REMOTE CONTROL ATLAS DVR PVR 5-DEVICE

[. . . ] The Atlas DVR/PVR 5-Device Universal Remote Control with Learning by Universal Electronics is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, its packed with advanced features such as: · preprogrammed control to operate the cable converter supplied by your cable service provider · Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder) · Programmable Master Power key for master on/off control of your home entertainment equipment with a single keystroke · Instant Tune-In keys for assignment to your favorite channels · Channel Lock to lock channel selection only to the cable converter · Color-coded keys to quickly locate popular functions · Code library for popular video and audio devices Before using the product, you will need to install the enclosed batteries and also perform some programming to operate the specific home entertainment devices you wish to control. Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new remote control and cable service. [. . . ] To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e. The Atlas DVR/PVR 5-Device Universal Remote Control with Learning includes a Learning feature so you can add functions that are unique to your home entertainment devices (e. Your original remote controls must be in working order for learning to work properly. Learned keys are mode-specific, so each one can store a unique function for each mode. Do not use the following keys for learning: Device Keys, SETUP, Record (· Learning capacity is approximately 16 to 25 keys, depending on the code being learned. Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats. NOTE: Please have your original remote controls handy before programming learning. Programming a Learned Key NOTE: If more than 15 seconds pass between key presses, the remote exits programming. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 5. If the LED displays one long flash instead, either your batteries are low, or the Atlas DVR/ PVR 5-Device Universal Remote Control with Learning has a memory fault. , AUX, DVD, AUD, TV, or CBL) to assign a mode for learning, then the key that will learn the new code. Place the Atlas DVR/PVR 5-Device Universal Remote Control with Learning head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that you want the Atlas DVR/ PVR 5-Device Universal Remote Control with Learning to learn. The Atlas DVR/PVR 5-Device Universal Remote Control with Learning's LED will blink rapidly, then turn off. Continue holding the key on the original remote until the Atlas DVR/PVR 5-Device Universal Remote Control with Learning's LED blinks twice. Repeat steps 2 through 4 for another mode and/or key or press and hold SETUP to exit programming. Deleting a Single Learning Key This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see "Programming a Learned Key" on page 13) NOTE: If more than 15 seconds pass between key presses, the remote exits programming. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6. Repeat steps 2 through 3 for another key or press and hold SETUP to exit programming. Deleting All Learned Keys in a Specific Mode NOTE: If more than 15 seconds pass between key presses, the remote exits programming. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 5. [. . . ] iMPORTANT: Executing this program will erase all custom settings for Volume Lock , Learned Keys , Tune-In Keys , and Channel Lock. On the remote control, press and hold SETUP until the last-selected device key blinks twice. The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see "Installing Batteries" on page 8). [. . . ]