User manual UNIVERSAL REMOTE CONTROL BENDER

[. . . ] REMOTE CONTROL BENDER OWNERS MANUAL Rec eive r Location of Controls Bender Front Remote Control Indicators & IR Transmitter/Receiver Bender Back IR Probe DC Power Accessory DC 12 V, AC 120V/230V or 240V Adaptor x1 Infrared Extender X 1 Caution: This equipment has been tested and found to comply with CE regulation. [. . . ] Consult the dealer or an experienced radio/TV technician for help. Important Safety Precautions To prevent fire or shock hazard, do not submerge or expose this products to water To avoid electric shock, do not open this units. Doing so will void the warranty Use only the power adaptor provided with the Bender Do not overload wall outlets or extension cords. If you are experiencing difficulty with this products, do not attempt to service it yourself. Please call your vendor for assistance. Product Description The Bender Infrared Remote Control Extender enables you to extend the range and angles of your present Infrared Remote Control Unlike ordinary remote controls which are only effective in close range. " line of sight" use, The Bender can receive the IR signal from your remote controller and retransmit it via an IR probe to any devices. Such method can extend the angle and distance of original IR signal. Applications The Remote operation of electronics products that utilize IR (Infrared) remote control technology such as: Satellite Receivers Televisions VCR's (Video Cassette Recorders) CD's (Compact Disc) DVD's (Digital Video Disc) (Laser Disc Players) Converter Boxes Audio / Hi-Fi Stereo Systems Any (IR) Remote Controlled Devices LDP's Cable "Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. " Application Diagram Bending of the IR Signal Installation & Operation Guide Picture 1 Working with extender probe Power Adaptor Make sure the IR probe is sticked toward IR sensor receiving Window with proper position (about within 0. 5M and working angles +/- 15°). Picture 2 Working Angle not more than +/- 15° Power Adaptor Keep Vertical Remote Control Picture 4 Distance Not less than 0. 3M and not more than 5M Working Angle not more than +/- 15° Care and Maintenance Keep the Bender dry. Extreme temperature can shorten the life of electronic devices Handle the Bender gently and carefully. [. . . ] Effective operating range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5M(Min. ) Infrared Receiver range: Tuning Frequency. . . . . . . . . . . . . . . . . . . . . 38 KHz Extender Probe. . . . . . . . . . . . . . . . . . . . . [. . . ]