User manual UNIVERSAL REMOTE CONTROL COMCAST

[. . . ] Use Enter to enter channels on some TV models or information on menu screens. >Use PIP Swap to switch the images and sound between the main and window pictures. 6. TV Code: Use PIP Move to move the picture to different positions in the main picture. Use PIP CH + (or CH -) to select the next higher or lower PIP channel. second digit, 3 for the third digit, and 4 for the fourth digit. [. . . ] Press Power once to turn on or off the selected home entertainment device. Press All On once to turn on or off all programmed devices in this order: Cable, TV, and AUX. Press ON DEMAND once to access Comcast's ON DEMAND menu (not available in all areas). PROGRAMMING DEVICE CONTROL The Comcast Custom 3-Device universal remote control is preprogrammed at the factory to operate the Cable Box supplied by your Comcast system, an RCA TV, and an RCA VCR (in the AUX mode). To control devices other than default brands (excluding the Cable Box), perform the below steps; otherwise skip this section: 1. Turn on a device (e. g. , VCR or DVD Player) and, if applicable, insert media, (e. g. , video cassette or disc). NOTE: Please read steps 2 to 6 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. REASSIGNING DEVICE KEYS Device Type:______________ TV Code: The Comcast Custom 3-Device universal remote control can be set up to control a second device. For example, to have the unit control a TV, a Cable Box, and second TV, you will need to reassign the unused AUX key to operate the second TV as follows: 1. Then press and hold Setup until the AUX key blinks twice, then release Setup. See Programming Device Control for instructions. CHANGING VOLUME LOCK The Comcast Custom 3-Device universal remote control is set at the factory to control the TV volume in all modes. However, you may change the Volume Lock setting to Individual Volume Unlock to unlock a specific device's volume controls for independent operation in its own mode (e. g. , Audio Receiver volume controls in the AUX mode). Or, if desired, you can perform Global Volume Unlock so that the volume controls of all devices can be independently operated in their own modes. 3. 3. 2. On the remote control, press a device key once (i. e. , AUX or TV). NOTE: Use the AUX key to program control of an Audio Amplifier or Receiver, a DVD Player, a HomeTheater-In-A-Box Device, a PVR (or DVR), or a VCR. User Guide OVERVIEW The Comcast Custom DVR 3-Device universal remote will control up to three home entertainment devices, including a Digital Video Recorder enabled Cable Box (used by Comcast Systems). The remote control requires installing two (2) new AA batteries (included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference. In the AUX or TV mode, use the transport keys to control a VCR, PVR, or DVD player. Use A, B, or C to access interactive program guide functions on your Scientific Atlanta Explorer, Pioneer Voyager, or PACE cable box. Use Page+ (or Page­) to page up (or down) through menu screens and the interactive program guide. Use these keys to move the cursor in the interactive program guide and menu screens. Use OK (Select)to select menu options, PPV 4. 3. Press and hold Setup until the selected mode key blinks twice, then release Setup. Locate the code for your device in Manufacturer's Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first. If you perform this procedure correctly, the selected mode key will blink twice. NOTE: If you enter an invalid code, the selected mode key will display one long blink and exit the programming mode. [. . . ] If it does not respond, repeat steps 2 to 6, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code. NOTE: If the device does not have a Power key, press the (Play) key. 5. 2. 3. Press and hold Setup until the selected mode key blinks twice, then release Setup. Now, volume controls for all devices can be independently controlled in their own modes. 3. 7. NOTE: When the batteries need to be replaced, the remote control will stop working. [. . . ]