User manual UNIVERSAL REMOTE CONTROL HOME THEATER MASTER MX-800

[. . . ] Congratulations on your choice! GUIDE TO SIMPLE HOME THEATER OPERATION WITH YOUR MX800 RF REMOTE CONTROL © 2003 Universal Remote Control, Inc. All rights reserved. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. [. . . ] If one component does not turn on/off, simply touch the button again. TIP ­ The remote control is still issuing commands while the indicator flashes. 4 Using the MAIN Menu The MAIN Menu enables you to either select a new Activity or simply select a new Device to control. When you select a new activity, the remote control will issue a MACRO (a timed sequence of many commands from many different remote controls). It will issue all of the commands necessary to switch the sound and picture of your system. When you select a device, the remote control becomes the remote control you select WITHOUT affecting the home theater. Select a New ACTIVITY 1. Touch the PAGE button if you don't see the activity you want. 2. For example if you wish to watch a DVD movie, touch the DVD button. 5 The MAIN Menu buttons issue MACROS that reset the sound and picture of your home theater to a new activity. TIP ­ The remote control is still issuing commands while the indicator flashes. . If the sound or the picture still are not correct, repeat steps 1 and 2. Select a DEVICE Only 1. While holding the MAIN button down, touch the button next to the desired screen label. The remote control will now display the name of the selected device and all buttons will operate the device, however, the sound and the picture of your system have not been changed. 6 Controlling the Volume For your convenience, the VOLUME Up, VOLUME Down and the MUTE buttons will always control the surround sound system, regardless of what activity or device you are controlling. Operating any Device You can see the name of the device at the top of the screen. If it is not the one you want, return to the MAIN Menu and select a new device or activity. DVD OPEN CLOSE All of the printed label buttons on the remote operate just like the original remote control (with the exception of Volume Up, Volume Down and Mute which operate your surround sound system). 7 The Power ON and OFF buttons now operate only the selected device (to turn the entire system on/off, return to the MAIN Menu). DVD The ten screen labeled buttons are now labeled with any commands that do not fit one of the buttons with printed labels. DVD OPEN CLOSE AUDIO VIDEO ANGLE SCENE TITLE SUB SKIP- SKIP+ Up to 40 screen labeled buttons are available for each device. To view the additional buttons, press the PAGE button to display additional pages. The the remote control can display up to four pages of screen labeled buttons for each activity or device!As you scroll through the pages, notice that the bottom title bar displays which page you are viewing (PAGE 1, PAGE 2, etc. ). 8 The thumbpad easily operates on screen menus with either the Left or Right hand. When you are operating a device with any kind of on-screen menu, guide or display, the thumbpad offers you easy one-handed control with your thumb. To SELECT or say OK, simply press your thumb straight down. You'll feel the click as the OK/SELECT/ENTER command is sent. Using FAV - Favorites The favorites menu is created uniquely for you by your custom installer. The screen labeled buttons now issue timed sequences of commands that will reset your system with one touch. Typically, the favorites menu is programmed with one touch "shortcut" buttons that issue all of the necessary commands to change the channel of your satellite dish or television. Thus, instead of entering a two or three digit number (which you must remember) and the enter command, you simply select the favorite button labeled HBO, CNN, TNT etc. [. . . ] The screen is glass and is easily breakable. 12 Warranty The MX-800 is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase. This warranty does not cover the following items: -Batteries, or damage to the remote from faulty batteries. -Products that have been modified or incorporated into other products. [. . . ]