User manual UNIVERSAL REMOTE CONTROL MX-1000

[. . . ] Home Theater Master LCD Touch Screen Preprogrammed and Learning Remote Control MX-1000 Operating Manual Table of Content 1. Preprogramming Method 9 1) Using a three-digit code number 2) Auto scan with brand names B. To erase the learned buttons 14 1) To erase a single button 2) To erase all the learned commands in a single device 3) To erase all the learned commands in all twelve device 7. Introductions - General The MX-1000 is a very powerful and flexible preprogrammed and learning remote control with LCD touch screens. [. . . ] Macro Programming: There are three type of macro functions you can program. M1, M2 and M3 in the Main menu: Designed to send out up to twenty eight commands from each of the three buttons. Twelve device buttons in the Main menu: Send out up to fourteen commands from each device button. Favorite Channel Buttons: You can create and design up to 60 buttons as your Favorite Button in video modes. Each favorite channel button can send out up to fourteen commands with one button press. 7. Press one of the twelve device buttons you wish to store macro functions with the cursor on DEVICE BUTTON. Move the cursor to COMMON BUTTON and select again either the same or another device button whose functional buttons you wish to store in the device macro button you selected first. Store the commands you selected to the macro button by pressing CH (UP) button. Press the device you wish to program favorite channels with cursor on COMMON BUTTON. Press one of the favorite channel buttons and enter the channel number you wish to store in the FAVORITE channel button. Store the commands you selected in the Favorite channel button by pressing Channel UP button. Once you complete the macro programming and wish to exit, press both the MAIN and PAGE buttons simultaneously. TO EXIT in setting mode and press the cursor down to exit or simply press the MAIN button to exit to main menu. NOTE: Pressing the Volume Up button during the macro programming will add a time delay of 0. 5 seconds between the commands. Pressing the Volume Up button twice will cause a pause of 1 second between the commands where the delay was inserted. B-2. SYSTEM & OPTIONS Move the cursor on the LCD either to the COMMON BUTTON to program M1 M3 and favorite channel buttons or to the DEVICE BUTTON to program the device buttons by using MUTE button. Press one of the three macro buttons, M1 M3, with the cursor on DEVICE BUTTON. Store the commands you selected to the macro button by pressing CH (UP) button. To erase the functions you stored in any of the macro buttons, press the Channel UP button without entering any commands during the macro programming mode. 17 18 7. Audio receiver Volume Up and Volume Down and Mute in Satellite mode ) using a volume punch through feature. You can also have four VCR ( or DVD ) transport buttons, Play, Stop, Fast Forward and Rewind, operate in another mode such as in Satellite, Cable and Audio modes. Press VOLUME UP button for Volume Punch Through or press the PLAY button for Transport Punch Through. [. . . ] Set up code table 29 30 Set-Up Function Table SATELLITE Button Name Device Name POWER CH UP CH DOWN VOL UP VOL DOWN MUTE PRE. CH PLAY STOP REW F. F CURSOR ENTER CURSOR UP CURSOR DOWN CURSOR LEFT CURSOR RIGHT 1 2 3 4 5 Page 6 17 8 9 0 INPUT ENTER MENU GUIDE EXIT INFO Page FAV. CH 2 ACTION ALPHA NEXT VIEW ALT AUDIO Select Up Down Left Right 1 2 3 4 5 6 7 8 9 0 TV/SAT Enter Menu Guide Exit/Cancel Info Fav. View Alt. Audio FAV15 FAV16 FAV9 FAV10 FAV11 Page FAV12 4 FAV13 FAV14 FAV7 FAV8 Set-Up Function Table TV SAT Functions Rec. Fetch SAT Functions SAT(On) On/Off (Off) Channel Up Channel Down Volume Up Volume Down Mute Prev. [. . . ]