User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL 4730

[. . . ] The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your One For All Access 4 to operate your TV. Press and hold SET until the One For All Access 4's red light blinks twice, then release SET. Enter the first four-digit TV code listed for your brand in the "SETUP CODES FOR TVs" section. [. . . ] Try all of the codes listed for your brand of home entertainment component in the "SETUP CODES" section. Many setup codes may allow for partial functionality, however, only one set up code will operate your home entertainment component correctly. Make sure all of the components that you are setting up can be operated with an infrared remote control. Some combo units, however, may require both a TV code to control volume and a VCR code for the remaining functions. As a safety feature on the One For All Access 4, you must press the REC key twice. Due to RCA design (1983-1987), only the original remote control will operate these functions. If your original remote control required an ENTER keystroke when changing channels, press the ENTER key on the One For All Access 4 after you enter the channel number. Press and hold SET until the One For All Access 4's red light blinks twice. Please contact us in any of the following ways: · Please visit : www. oneforall. com · If the above website is not able to provide you with the information you need, please email us at ofasupport@ueic. com ONE FOR ALL® PRODUCTS 90-DAY Limited Warranty One For All® warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase. This limited warranty is valid only on ONE FOR ALL® product purchased and used in the United States of America or Canada, and does not apply to products used for industrial or commercial purpose. The limited warranty does not cover damage or failure caused by products or services not supplied by ONE FOR ALL® , or which result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, set-up adjustment, improper maintenance, alteration, maladjustment of consumer controls, modifications, commercial use, or that is attributable to acts of God. ONE FOR ALL® SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. To obtain warranty service for a defective product during the warranty period, please return the product, preferably in the original carton, along with your purchase receipt, to the store of original purchase. The store, at its option, will replace or repair this product if found to be defective. One For All (330) 405-8655 One For All® is the registered trademark of Universal Electronics Inc. is the Licensee of the ONE FOR ALL® brand for the United States of America and Canada. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc. One For All is designed for compatibility in North America excluding Mexico. URC-4730 - One For All Access 4 08/02 3. 6. 4 Unlocking Volume Control: Searching For Your Code If your TV, VCR or Cable Converter does not respond to the One For All Access 4 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the One For All Access 4 to operate your TV, then: 1. [. . . ] Enter the first four-digit TV code listed for your brand in the "SETUP CODES FOR TVs" section. If you perform this procedure correctly, the red light will blink twice when you enter the final digit of your code. POWER Keypad scrambled? If the above does not work. 2. For the first digit of your four-digit code, press 1, wait 3 seconds and count the number of times the red light (LED) blinks on the One For All Access 4. If the light does not blink when you press the number 1, the digit is zero. [. . . ]