User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL 5600MAN

[. . . ] URC 5600 Cinema 5 Previous Model Name: Big Easy HT OVERVIEW Thank you for purchasing the One For All® Cinema 5 universal remote control. Before you can use your new remote , you will need to program it to operate the specific home entertainment components you wish to control. Follow the instructions detailed in this manual to set up your Cinema 5 and enjoy your new remote control. FEATURES AND FUNCTIONS Here are the features and functions of the Cinema 5 universal remote control. [. . . ] Your Cinema 5 is now programmed to operate your DVD or Laser Disc Player. Write your DVD or Laser Disc Player code in the boxes to the left for future reference. Your Cinema 5 is now programmed to operate your Cable Converter or Satellite. Write your Cable Converter or Satellite code in the boxes to the left for future reference. Remember, if you want to use your Cinema 5 to operate your DVD or Laser Disc Player, press the DVD/LD key first. Programming the Cinema 5 to operate your Receiver/Tuner: Locate the brand name of your Receiver/Tuner and then write it in the space below. Receiver/Tuner Brand: Locate the brand name of your Receiver/Tuner in the "Setup Codes For Receivers/Tuners" section. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 5 to operate your Receiver/Tuner. Press and hold SETUP until the Cinema 5's red light blinks twice, then release SETUP. Enter the first four-digit Receiver/Tuner code listed for your brand in the "Setup Codes For Receivers/Tuners" section. If you perform this procedure correctly, the red light will blink twice when you enter the final digit of your code. If your Receiver/Tuner does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your Receiver/Tuner. Write your Receiver/Tuner code in the boxes to the left for future reference. Remember, if you want to use your Cinema 5 to operate your Cable Converter or Satellite, press the CBL/SAT key first. SEARCHING FOR YOUR CODE If your TV, VCR or Cable Converter does not respond to the Cinema 5 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the Cinema 5 to operate your TV, then: 1. Press and hold SETUP until the Big Easy HT's red light blinks twice, then release SETUP. 3. Slowly alternate between pressing POWER* and TV until your TV turns OFF. You may have to press this sequence of buttons (POWER* then TV) up to 100 times to search the entire library of codes. When your TV turns OFF, press and release SETUP to lock in the code for your TV. Aim the Cinema 5 at your Cable Converter or Satellite and press POWER. Your Cable Converter or Satellite should turn off. If your Cable Converter or Satellite does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your Cable Converter or Satellite. 2. For the first digit of your four-digit code, press 1 and count the number of times the red light (LED) blinks on the Big Easy HT. [. . . ] Make sure you are aiming your Cinema 5 at your home entertainment component and that you are within 15 feet before using your remote. 2. The Cinema 5's red light will blink twice. Now, whenever you press VOLv, VOLw or MUTE on the Cinema 5 each component will control its own volume, provided each component has volume control. USING THE SLEEP KEY The SLEEP key allows you to access the sleep timer of your TV, Cable Converter/DBS Satellite or Audio component. You can access your TV, Cable Converter, DBS Satellite or Audio component's Sleep Timer by pressing the SLEEP key. [. . . ]