User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL 8910 V2

[. . . ] A/V LCD 8-DEVICE WITH LEARNING UNIVERSAL REMOTE CONTROL (URC-8910) User's Guide TABLE OF CONTENTS Introduction . 74 2 INTRODUCTION The One For All A/V LCD 8-Device With Learning Universal Remote Control (URC-8910) is our latest high-performance universal remote control. It is designed to operate up to eight home entertainment devices, including TV, video, and audio components. Moreover, this remote control contains sophisticated technology that will allow you to conveniently consolidate the clutter of all of the original remote controls used in your home entertainment system. [. . . ] You will see the display change to your device choice (e. g. , [CBL]). SELECT b. Press SELECT once to accept the assignment in step 5b. You will see the display change to the next Control Group assignment, [MENU]). 6. SELECT Press SELECT once to enter Menu Control Group assignment. You will see the display change to the last-selected device (e. g. , [CBL]). a. For this example, press CBL once. This will assign the entire group of Menu Controls (i. e. , MENU, GUIDE, Cursor Controls (v, w, , ), SELECT, and EXIT) to the cable converter. You will see the display change to your device choice (e. g. , [CBL]). v v SELECT b. Press SELECT once to accept the assignment in step 6a. You will see the display change to the next Control Group assignment, [PIP]). 7. SELECT Press SELECT once to enter PIP Control Group assignment. You will see the display change to the last-selected device (e. g. , [CBL]). a. This will assign the entire group of PIP Controls (i. e. , PIP, MOVE and SWAP) to the TV. You will see the display change to your device choice (e. g. , [TV]). Press SELECT once to accept the assignment in step 7a. You will see the display change to the first Control Group assignment, [PLAYBACK]). 8. To change an assignment, use the v or w keys to navigate to a specific group and make changes by repeating the appropriate step (3, 4, 5, 6, or 7). Otherwise, to exit programming, press and hold SELECT until you see [SUCCESS] appear in the display, followed by [EXIT SETUP]. The URC-8910 remote control will automatically exit the programming mode and return to normal operation. SELECT Operating The Home Theater Mode After programming the Home Theater mode (see the previous section), you simply activate it by pressing HOME THEATER once. Instantly, groups of URC-8910 remote control keys will be assigned to their programmed devices. For the above example (in the previous section), pressing HOME THEATER once would assign the following keys to the VCR, TV, and cable converter: VCR: TV: PLAY, STOP, FF, REW, F. FWD, F. REW, PAUSE and REC VOL+, VOL-, MUTE, PIP, MOVE and SWAP Cable Converter: CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST, SLEEP, INFO, TV/VID, MENU, GUIDE, Cursor Controls (v, w, , ), SELECT and EXIT v v 47 USING COMMERCIAL SKIP The URC-8910 remote control includes a unique Commercial Skip feature, once programmed, that will allow you to skip viewing commercials by pressing the COM SKIP key. Then, as you change channels (to view another program without commercials), an internal timer will count down a preset time interval before returning the device to the original channel. Programming Commercial Skip For example, let's assume you are watching a national sports event on channel 2 that consistently breaks for one-minute commercials. Meanwhile, cable channel 26 is showing a favorite action movie without commercials. By performing the following steps, you can set Commercial Skip to automatically return the cable converter to the sports event after one minute of viewing the movie: NOTE: Commercial Skip only works in the following modes: TV, VCR, DVD, CBL, and SAT. 1. On the URC-8910 remote control, press and hold COM SKIP until you see the display change from the current device and time to [CHANNEL]. NOTE: The device, its code, and time are examples. NOTE: To exit programming at any time, press EXIT once or allow 30 seconds of inactivity to lapse. You will see [EXIT SETUP] as the remote control returns to normal operation. NOTE: [INVALID] means you have inadvertently pressed an incorrect key. Note your error and continue programming. 3. Use the keypad to enter a favorite channel number (e. g. , 002). The display will show your entry. NOTE: If the original remote control required pressing an Enter key to change the channel, also press the ENTER key after the channel number (e. g. , 0-0-2-ENTER). You will see [EXIT SETUP] as the remote control returns to normal operation. Then try programming Commercial Skip again starting with step 1. 4. SELECT Press SELECT once to accept your channel entry. You will see the display change to [30 SEC]. 48 5. [. . . ] Use EXIT to exit from your VCR's guide or menu. v RROUND SOUND SU SELECT Use the cursor keys (v, w, or ) to move the cursor in the VCR's program guide and menu screens. Use VOL+ (or VOL-) to raise (or lower) the VCR's audio volume (if applicable). Press MUTE once to turn the VCR audio off or on (if applicable). Use FAV to scan favorite channels and/or all channels. (See Using Channel Scan and Programming Favorite Channel Scan on page 41. ) Use CH+ (or CH-) to select the TV's next higher (or lower) channel. continued on next page. . . v 71 KEY INDEX VCR Functions (continued) Press PREV once to recall the last-viewed channel and to page back one screen on the VCR's main menu. Use the keypad (1 ~ 9 and 0) to directly select channels (e. g. , 009 or 031). [. . . ]