User manual UNIVERSAL REMOTE CONTROL ONE FOR ALL URC4041

[. . . ] For master power control, see Programming A Master Power Macro on page 12. Use the keypad (1 ~ 9 and 0) to directly select channels (e. g. , 009 or 031). Use TV/VID to switch the TV's input to view TV or video programs. Use GUIDE to display your selected device's program guide or setup menu. Use INFO/OSD to display the current channel and program information or on-screen directory. [. . . ] This allows you to still individually power devices on or off. 4. 5. Operating The Master Power Macro 1. 2. You will see the devices turn on or off according to your programmed sequence. NOTE: The currently-selected device will always turn on or off first, followed by the remaining programmed sequence. After the master power sequence has been completed, the remote control will be set to control the first powered-on device. NOTE: If one or more devices does not have a POWER key, the power off/on sequence may be slightly delayed when the remote control signals the device(s). This action is normal. 12 IMPVE4P manual 1. 0 4/11/03 4:34 PM Page 13 Clearing The Master Power Macro 1. Press and hold SET until the LED (red light) blinks twice, then release SET. Then press POWER once. 3. Press and hold SET until the LED blinks twice, then release SET. The Master Power Macro is now cleared. USING KEYMOVER The One For All DVD Expert Universal Remote Control includes a Keymover feature that allows you to map (or copy) keys from one mode (i. e. , source mode) to another mode (i. e. , destination mode). NOTE: The following keys should not be used as a source or destination: DVD/VCR, AUX, CBL/SAT, TV, SET, FAV, and REC. Programming Keymover For example, if your DVD player does not have volume control, you can map those keys (i. e. , VOLL, VOLM, and MUTE) from TV mode to DVD/VCR mode as follows: 1. Press and hold SET until the LED (red light) blinks twice, then release SET. The LED will blink twice, indicating the keymoved sequence is correct. Repeat steps 1 through 7 twice more to map remaining volume control keys, substituting VOLM and MUTE as source and destination keys in steps 4 and 6. 13 continued on next page. . . IMPVE4P manual 1. 0 4/11/03 4:34 PM Page 14 USING KEYMOVER Programming Keymover (continued) Upon completion of the above procedure, you can now use your One For All DVD Expert Universal Remote Control to control the TV's volume and mute in the DVD mode, as well as in the TV mode. Restoring Keymoved Keys to Default Settings Restoring A Single Keymoved Key 1. Press and hold SET until the LED (red light) blinks twice, then release SET. The LED will blink twice. 4. Press the destination key twice (where the keymoved key is stored). Press and hold SET until the LED (red light) blinks twice, then release SET. The LED will blink twice. Restoring All Keymoved Keys In A Single Mode 1. 2. 3. Press the destination mode twice (where keymoved keys are stored). The LED will blink twice. RE-ASSIGNING DEVICE KEYS The One For All DVD Expert Universal Remote Control can be set to control a second TV, PVR, VCR, DVD player, or other device. For example, to control a TV, a cable box, and two DVD players, re-assign the unused AUX key to operate the second DVD player as follows: 1. On the remote control, press and hold SET until the LED (red light) blinks twice, then release SET. The LED will blink twice. 2. 14 IMPVE4P manual 1. 0 4/11/03 4:34 PM Page 15 3. Press DVD/VCR once, then press AUX once. The LED will blink twice. 4. The AUX key is now ready to be set up to control your second DVD player. See Programming Device Control on page 9. To re-assign other device keys to the AUX key, repeat steps 1 through 4 with a sequence from the below chart: NOTE: Only one device can be assigned to an unused device key at a time. To Re-Assign Device AUX as 2nd TV key: AUX as 2nd CBL/SAT key: Perform Sequence SET - 9 - 9 - 2 - TV - AUX SET - 9 - 9 - 2 - CBL/SAT - AUX When a re-assignment is done, the LED will blink twice to confirm your choice. At that time, you will need to program the remote control for the new device (see Programming Device Control on page 9). USING CHANNEL SCAN In the DVD/VCR, CBL/SAT, or TV mode, use the FAV key to start a 3-second scan of all channels. [. . . ] To obtain warranty service for a defective product, please return the product, preferably in the original carton, along with your purchase receipt, to the store of original purchase for the first 90 days. A note detailing the complaint would be helpful. The store, at its option, will replace or repair this product if found to be defective. If the unit has been purchased more than 90 days ago, pls return it to Impact Distribution Services, 6262 Patterson Pass Road, Suite C, Livermore, CA 94550 together with the original receipt and $3. 95 to cover postage and handling. The manufacturer reserves the right to substitute a currently manufactured model with equal or superior features. [. . . ]