User manual UNIVERSAL REMOTE CONTROL ORION MX-850

[. . . ] Congratulations on your choice! Using the MAIN Menu Select a New ACTIVITY 4 Select a DEVICE Only Controlling the Volume Operating Any Device Using FAV - Favorites Backlighting 5 6 6 8 10 10 11 11 12 12 OPERATING YOUR SYSTEM WITH THE ORION © 2004 Universal Remote Control, Inc. All rights reserved. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. [. . . ] When you select a new activity, the remote control will issue a MACRO (a timed sequence of many commands from many different remote controls). It will issue all of the commands necessary to switch the sound and picture of your system. When you select a device, the remote control becomes the remote control you select WITHOUT affecting the home theater. 2. Turning on the system may take ten to twenty seconds. Select a New ACTIVITY 1. Touch the PAGE button if you don't see the activity you want. 3. If one component does not turn on/off, simply touch the button again. TIP ­ The remote control will not respond to a new button push while is still issuing commands. While busy, the indicator flashes at the top of the screen next to the screen title. 2. For example if you wish to watch a DVD movie, touch the DVD button. 5 6 Controlling the Volume For your convenience, the VOLUME Up, VOLUME Down and the MUTE buttons will always control the surround sound system, regardless of what activity or device you are controlling. The MAIN Menu activity buttons issue MACROS that reset the sound and picture of your home theater to a new activity. TIP ­ The remote control is still issuing commands while the indicator flashes. Operating any Device If the sound or the picture still are not correct, repeat steps 1 and 2. If it is not the one you want, return to the MAIN Menu and select a new device or activity. Select a DEVICE Only 1. While holding the MAIN button down, touch the button next to the desired screen label. The remote control will now display the name of the selected device and all buttons will operate the device, however, the sound and the picture of your system have not been changed. All of the printed label buttons on the remote operate just like the original remote control (with the exception of Volume Up, Volume Down and Mute which operate your surround sound system). 7 The Power ON and OFF buttons now operate only the selected device (to turn the entire system on/off, return to the MAIN Menu). 8 The thumbpad easily operates on screen menus with either the Left or Right hand. When you are operating a device with any kind of on-screen menu, guide or display, the thumbpad offers you easy one-handed control with your thumb. The ten screen labeled buttons are now labeled with any commands that do not fit one of the buttons with printed labels. To SELECT or say OK, simply press your thumb straight down. You'll feel the click as the OK/SELECT/ENTER command is sent. Using FAV - Favorites The favorites menu is created uniquely for you by your custom installer. The screen labeled buttons now issue timed sequences of commands that will reset your system with one touch. Typically, the favorites menu is programmed with one touch "shortcut" buttons that issue all of the necessary commands to change the channel of your satellite dish or television. Thus, instead of entering a two or three digit number (which you must remember) and the enter command, you simply select the favorite button labeled HBO, CNN, TNT etc. Your custom installer may invent a feature unique to Up to 40 screen labeled buttons are available for each device. [. . . ] Units purchased from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items: -Batteries, or damage to the remote from faulty batteries. -Products that have been modified or incorporated into other products. -Units purchased from unauthorized dealers or companies. Cleaning The Screen Do not use abrasives or liquid cleaning solutions! [. . . ]