User manual UNIVERSAL REMOTE CONTROL UR2-CBL-CV04

[. . . ] Operating Instructions For CABLEVISION Remote Control UR2-CBL-CV04 1 Introduction The remote control is designed to operate the Scientific-Atlanta Explorer 8000, Pioneer Voyager DVR and the Pace Micro DVR Series set top boxes and the majority of TV's on the market. 3 Button Functions STEP3 Point the remote control toward the TV and enter the three-digit code number assigned to your brand from the code tables. *Tip : The TV will turn off when the correct three-digit code number has been entered. [. . . ] STEP2 Press the [TV] button and the [SEL] button simultaneously for 3 seconds. The next step must be entered while the iO button is on. 4 Operations Default State : Device Default: Scientific-Atlanta Explorer 8000 Volume Default : TV volume and mute through the TV, with the option of controlling volume and mute through the Cable. Refer to Section D for programming the volume and mute through your Cable. 5 Programming the Remote Control. A. Three-Digit Code Programming Method. The remote control can be programmed by pressing in a three digit code number that corresponds to particular manufacturers and brands of TV. The three-digit code numbers are listed in the code table of the instruction manual. STEP2 Press the [TV] button and the [SEL] button simultaneously for 3 seconds. The iO button will turn on indicating the unit is ready to be programmed. The next step must be entered while the iO button is on. STEP3 Press the [CH+] or [CH-] button one step at a time or keep it pressed. *Tip : You can verify that you selected the correct code by pressing the [MUTE] button. The iO button will blink twice to confirm that the code has been stored. Universal Remote Control, Inc. www. universalremote. com OCE-0030A Rev 09(10/18/07) www. universalremote. com C. To Find the Three Digit Code Number That was Stored in the TV. STEP1 Press the [TV] button and the [SEL] button simultaneously for 3 seconds. The iO button will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1 second interval of the iO button being turned off. Example : One blink, three blinks and eight blinks with an interval of 1 second of iO button being turned off, indicates the code number 138. [. . . ] Memory Lock System. This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control. G. Write your TV Set-up codes: Set-up Code Number : www. universalremote. com [. . . ]