User manual UNIVERSAL REMOTE CONTROL UR3-J22TWM

[. . . ] Operating Instructions For 3 Function Cable Remote Control UR3-J22TWM 1 Introduction The remote control is designed to operate the Motorola CFT2200 set top box and the majority of TV and VCR/DVD equipment on the market. 3 Button Functions *Tip : The equipment will turn off when the correct three-digit code number has been entered. You can verify you have selected the correct code by pressing the [MUTE] button, the equipment should turn on or turn off. *Note : If there is more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off. [. . . ] The LED will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1 second interval of the LED being turned off. Example : One blink, three blinks and eight blinks with an interval of 1 second of LED being turned off, indicates the code number 138. Note : Ten blinks is equal to the number 0. STEP4 Store the three-digit code number by pressing the [VCR POWER] button once again. The LED will blink twice to confirm that the code has been stored. E. Volume Punch Through: By following the steps below, the user can program the volume controls (Volume UP, Volume Down and MUTE) from one device to operate in another device mode. The default volume control settings on the remote control is TV volume control. If you wish to store the CABLE volume control in CBL mode, use the following steps. STEP1 Press the [CABLE POWER] button and the [SEL] button simultaneously for 3 seconds. To return to original state: If you wish to restore the TV volume control in CBL mode, repeat the above steps by pressing [TV POWER] in step 3. turns the volume up and down displays help for on-screen display screens HEL P INFO future use FAV cycles through your favorite channels MUTE turns volume off future use recalls the last channel that was viewed switches between cable TV and Music Choice TM displays the quick function screen MOVIES future use INFO displays channel and program information exits the on-screen display menus CABLE GUIDE displays the program guide CURSOR KEYS navigate through on-screen guides displays the main on-screen display menu SEL SEL selects options from the program guide and be used to set up the remote. B. Auto Search Method. If the three-digit code numbers assigned to your brand do not turn off your equipment or the code tables do not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by the following steps: STEP1 Turn on the equipment you wish to operate. STEP2 Press the [DEVICE] button (TV POWER or VCR POWER) to be programmed and the [SEL] button simultaneously for 3 seconds. STEP3 Point the remote control toward the equipment and alternately press the [CH+] (or [CH-]) button and the [MUTE] button. *Tip : You can verify that you selected the correct code by pressing the [MUTE] button again. [. . . ] LOW BATTERY WARNING: When the battery is low (2. 0V-2. 3V) and needs to be replaced with fresh batteries, the LED will blink twice whenever a device [POWER] button is pressed to turn on equipment. 4 Operations Default State : Device Default: Motorola CFT2200 Volume Default : TV volume and mute through the TV, with the option of controlling volume and mute through the Cable Converter. Refer to Section E for programming the volume and mute through your Cable Converter. G. Memory Lock System: This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control Universal Remote Control, Inc. www. universalremote. com OEE-0035N Rev 07 (07/09/04) H. [. . . ]