User manual UNIVERSAL REMOTE CONTROL UR5U-8700L SPECS SHEET

[. . . ] The Component LED light will blink twice to confirm that the code was successfully stored. *Note : If the Pre-Programmed Method did not work, or if the Code Tables do not list your Component brand, use the AutoSearch Method as explained in Section B. STEP4 Test functions. If any of the functions do not work as they should, repeat from STEP 3 using [CH ] or [CH ] buttons to find the correct code. (Same as for 3-Digit *Note : If the 3-digit code number you just entered is the correct number, the Component will turn Off. [. . . ] If any of the functions do not work as they should, you need to find a new code. STEP5 Once you have found the correct 3digit code, save it by pressing the [AUX] button one more time. The Component LED light will blink twice to confirm the code was stored. Now when you press the AUX button, all the buttons will work with that 5th Component. G. Programming Volume Control channel you want programmed first (for example, 007) using the Number Pad, then press the [STOP] button. Then enter the code for the next channel (for example, 050), then press the [STOP] button. Programming the System On/Off Button This allows you to program the System On/Off button so it can send up to five power On/Off commands with one button press. STEP2 Press the [SYSTEM ON/OFF] button and the [OK/SEL] button simultaneously for 3 seconds. STEP3 Press the first [COMPONENT] button you want to store in the [SYSTEM ON/OFF] button and then the [POWER] button. Repeat this for other Components until you have stored all the desired power commands into the [SYSTEM ON/OFF] button. The [CBL] button will blink twice to confirm the commands have been saved. Volume and Mute control are factory- STEP4 Press the [CH ] button to store the channels that were selected. The [CBL] programmed to automatically transfer to the button will blink twice to confirm the respective Component mode you select, as storage of commands. follows: To access the programmed channels, press the [MACRO] button once. Press once again and it will However, you can program the volume controls bring up the second channel. Press again and (Volume Up, Volume Down and Mute) from one it will bring up the third channel. CBL : CBL DVD: TV T V : TV AUX: AUX VCR: TV If you wish to store the TV volume control in I. When the batteries are low and need to be STEP1 Press the [CBL] button and the replaced with fresh batteries, the Component [OK/SEL] button simultaneously for 3 LED lights will blink 2 times in sequence seconds. The [CBL] Component LED whenever a [POWER] button is pressed to turn will turn on for 30 seconds. STEP3 Press the [TV] button. TV Manufacturer/Brand A MARK ABEX ACCURIAN ADMIRAL ADVENT ADVENTURA AIKO AKAI ALBATRON ALERON AMERICA ACTION AMPRO AMSTRAD ANAM AOC APEX APEX DIGITAL AQUAVISION ASTAR AUDIOVOX AVENTURA AVION AXION BELCOR BELL&HOWELL BENQ BOXLIGHT BRADFORD BROCKWOOD BROKSONIC BYDESIGN CANDLE CAPEHART CARY AUDIO DESIGN CELEBRITY Set-Up Code Number 112 143 025 036 072 251 333 247 388 002 103 116 146 248 404 405 473 475 323 387 391 017 028 043 073 052 043 054 056 080 112 116 363 112 058 572 006 573 574 477 076 454 388 052 441 039 116 333 072 423 266 043 116 238 031 032 116 002 003 363 058 266 001 J. Memory Lock System This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control. 3 Operations DEFAULT STATE: Component Default: CABLE Set Top Box (STB) Channel Default: CABLE channel and numbers through the CABLE STB. [. . . ] AUX Function: Programming a 5 th Component You can take advantage of the AUX function to program a 5th Component such as a second TV, VCR, DVD or Audio Component. STEP1 Turn on the 5th Component you want to program (TV, VCR, DVD or Audio). STEP2 Press the [AUX] button and the [OK/SEL] button simultaneously for 3 seconds. The [AUX] Component LED will turn on for 30 seconds. Point the remote control toward the Component and enter the 3digit code number assigned to your brand. The Component LED will blink twice to confirm the programming. F. [. . . ]