User manual VIEWSONIC PJ1172

[. . . ] ViewSonic PJ1172 LCD Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - Py - - Compliance Information For U. S. A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] memo The "SACRT RGB" message means the COMPONENT port is working as a SCART RGB port. Please refer to the item "COMPONENT" in this table. memo S2-ASPECT Select TURN ON or TURN OFF using the / buttons. : TURN ON TURN OFF When TURN ON is selected, an S2-video signal can be identified and the optimum aspect ratio is automatically selected. memo When the ASPECT button is used or the item "ASPECT" of the MAIN menu is operated, TURN OFF will be automatically selected to this item. Select EXECUTE using the button to reset the INPUT menu items. : EXECUTE CANCEL The items of the INPUT menu are collectively returned to the initial setting. Note that the item "INFORMATION" is not reset. RESET ViewSonic PJ1172 26 AUTO Menu With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item ADJUST Description Pressing the (or the ENTER) button performs the automatic adjustment. At a RGB signal The vertical position (V POSITION), the horizontal position (H POSITION), the clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically adjusted. memo Make sure that the application window is set to its maximum size prior to attempting to use this feature. At a video signal The signal type mode best suited for the respective input signal will be selected automatically. memo This function is available only when AUTO is selected to the item "VIDEO" of the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function. memo This operation requires approximately 10 seconds, and the message "AUTO IN PROGRESS" is displayed during the operation. a irregular picture, a color lack), please select the suitable mode to the item "VIDEO" of the INPUT menu. When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins blinking when the passed time with a proper signal (without no-signal and an unsuitable signal) reaches at the set time. Please refer to the section "Turning Off The Power". POWER OFF POWER ON Select TURN ON or TURN OFF using the / buttons. : TURN ON TURN OFF When TURN ON is selected, you can turn the projector on without pressing the STANDBY/ON button. (This table is continued to the following page. ) ViewSonic PJ1172 27 AUTO Menu (continued) Item SEARCH Description Select TURN ON or TURN OFF using the / buttons. : TURN ON TURN OFF When TURN ON is selected, detecting no signal cycles through input ports and displays the picture of retrieved signal. M1-D RGB BNC VIDEO S-VIDEO COMPONENT memo When TURN ON is selected, pressing the RGB button selects the M1-D ports, and pressing the VIDEO button selects the COMPONENT port. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will return to the state it was in prior to the search. RESET Select EXECUTE using the button to reset the AUTO menu items. : EXECUTE CANCEL The items of the AUTO menu are collectively returned to the initial setting. Note that the item "ADJUST" is not reset. ViewSonic PJ1172 28 SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item BLANK Description Select a type of BLANK screen using the / buttons. : MyScreen ORIGINAL BLUE WHITE BLACK The BLANK screen is displayed by pressing a button. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. [. . . ] Turn the INPUT dial and set it at a click point. 14 ViewSonic PJ1172 43 Specifications NOTE · This specifications are subject to change without notice. Item Product name Liquid crystal projector Specification Panel size 2. 5 cm (0. 99 type) Liquid crysDrive system TFT active matrix tal panel Pixels 786, 432 pixels (1024 horizontal x 768 vertical) Lens Lamp Speaker Power supply Power consumption Temperature range Size Zoom lens F=1. 7~2. 4 f=30. 5~45. 8 mm 310 W UHB 1. 0W + 1. 0W (Stereo) AC100 ~ 120V, 5. 2A / AC220 ~ 240V, 2. 2A 470 W 0°C ~ 35°C (Operating) 420(W) x 160(H) x 320(D) mm (not including protruding parts) · Please refer to the figure of the section "TECHNICAL" of the end of this manual. 7. 7kg RGB Input Ports RGB M1-D BNC (R, G, B, H, V) VIDEO Input Ports VIDEO IN S-VIDEO COMPONENT (CR/PR, CB/PB, Y) AUDIO Input Ports AUDIO IN 1 AUDIO IN 2 AUDIO IN R/L Lamp Air filter Others Weight (mass) Ports RGB output port RGB OUT Audio output port AUDIO OUT Control port CONTROL Other ports NETWORK REMOTE CONTROL DC OUT Optional Parts RLC-006 · Please call ViewSonic for the part number. · Please consult your dealer. ViewSonic PJ1172 44 Customer Support For technical support or product service, see the table below or contact your reseller. Country/Region United States Canada United Kingdom Europe, Middle East, Baltic countries, and North Africa Australia and New Zealand Singapore/India and Southeast Asia South Africa Other Asia/ Pacific countries Taiwan China Web site www. viewsonic. com/support www. viewsonic. com/support www. viewsoniceurope. com www. viewsoniceurope. com T = Telephone F = FAX T: (800) 688-6688 F: (909) 468-1202 T: (800) 688-6688 F: (909) 468-1202 T: 0800 833 648 F: (01293) 643910 Contact your reseller Email service. us@viewsonic. com service. ca@viewsonic. com service. eu@viewsoniceurope. com service. eu@viewsoniceurope. com www. viewsonic. com. au www. viewsonic. com. sg www. viewsonic. com/asia www. viewsonic. com. tw www. viewsonic. com. tw www. viewsonic. com. cn T: +61 2 9906 6277 F: +61 2 9906 6377 T: 65 6273 4018 F: 65 6273 1566 T: 886 2 2246 3456 F: 886 2 8242 3668 T: 886 2 2246 3456 F: 886 2 8242 3668 T: (0800) 061 198 F: +886(2) 8242-3668 T: (800) 820-3870 F: (021) 623 75373 service@au. viewsonic. com service@sg. viewsonic. com service@sd. iewsonic. com service@sd. iewsonic. com service@tw. viewsonic. com service. cn@cn. viewsonic. com ViewSonic PJ1172 45 LIMITED WARRANTY ViewSonic Projector What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. [. . . ]