User manual VIEWSONIC PJD6221

[. . . ] ViewSonic PJD6221 DLP Projector ® - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - - () - () IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic. com in English, or in specific languages using the Regional selection box in the upper right corner of our website. "Antes de operar su equipo lea cuidadosamente las instrucciones en este manual" - - - Podrcznik uytkownika - Kullanc klavuzu Model No. : VS12472 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. [. . . ] Suggesting to turn Off for most video sources and On for most computer sources. NetWork Enable or disable network management via RJ45 connector. Network Config (Computer / Video Mode) DHCP Abbreviation for Dynamic Host Configuration Protocol. When the "DHCP" sets to "Yes", it takes some time to obtain IP address from DHCP server. When the "DHCP" sets to "No", that means user will set IP address by manually. Auto IP function will be assigned an IP address if the projector could not obtain EN-23 an IP address from server even if DHCP is "Yes". The IP Address is the number that identifies this projector on the network. You cannot have two devices with the same IP Address on the same network. Subnet Mask A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Address. Gateway A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask. Network Restart Restart network function when the device is not working properly or to apply changes made on OSD configuration menu. Language (Computer / Video Mode) Select the language used by the on-screen menu. Factory Default (Computer / Video Mode) Restore settings to factory default . System Info (Computer / Video Mode) Source Display the input source. Frequency. EN-24 Network Control This feature provides the ability to remotely control and manage the projector through the network. Preparation: 1. Connect one end of the internet cable to the Network Control connector on the projector. Connect the other end of the internet cable to an available RJ-45 connector on your computer. Turn on your projector and computer. There are two ways to connect to the network control: A. When DHCP is enabled, IP Address, Subnet Mask and Gateway information will get from DHCP server automatically. EN-25 2. Start browser in PC and specify following URL, then click "Go" button. URL: http://(Projector IP address)/ For example, if projector IP address is 169. 254. 1. 1, specify URL: http:// 169. 254. 1. 1/ 3. If connection succeeds, the login screen is displayed. Below are the factory default settings for administrator, user and passwords. Item Administrator User User name Admin User Password <blank> <blank> For setting passwords, please go to Network Control page > Password. EN-26 B. Subnet Mask: A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Address. Gateway: A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask. 2. From your computer, go to Start > Settings > Network and Dial-up Connections > Local Area Connection and right click to select Properties. . EN-27 3. Select "Intel Protocol (TCP/IP)" and click "Properties". 4. Set your PC's IP address, and click OK. Click "Use the following IP address" The network address portion included in the IP address set into your PC should be common with projector's one. In this case, projector has "169. 254. 1. 1" IP address, specify "169. 254. 1. xxx" for PC's IP address. Select from 1 to 254 for "xxx" except 2 for PC. EN-28 5. Start browser in PC and specify following URL, then click "Go" button. URL: http://(Projector IP address)/ For example, if projector IP address is 169. 254. 1. 1, specify URL: http:// 169. 254. 1. 1/. 6. If connection succeeds, the login screen is displayed. [. . . ] You will need to provide your product's serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim. For Your Records Product Name: ________________________ Model Number: __________________________ Document Number: ____________________ Serial Number: ___________________________ Purchase Date: ________________________ Extended Warranty Purchase?To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. [. . . ]