User manual WACOM BAMBOO

[. . . ] Contents Index 1 User's manual for Windows & Macintosh ® ® Using a pen Customizing your pen Troubleshooting Using a tablet Customizing your tablet Digital inking Contents Index 1 Contents Index 2 BambooTM User's Manual for Windows® & Macintosh® English version 1. 1, April 26, 2007 Copyright © Wacom Company, Limited, 2007 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. [. . . ] If not: · Make sure the tablet USB cable is securely connected to the tablet and to an active USB port on your computer. · If you are connecting the tablet to a USB hub (or hub device such as a keyboard with USB ports), be sure the USB hub is properly connected to your computer and is active. · Check the cable for damage or try using a different, compatible cable. · Connect the tablet to a different USB port or try connecting to the USB port on another computer. · If the tablet ExpressKeys do not illuminate after your computer is on and has finished booting up, your USB port may be disabled. Now press both the upper left and lower right ExpressKeys and hold them down for three (3) seconds. · Do a quick check of the ExpressKeys by pressing each one in turn. All of the ExpressKeys should glow at a brighter level each time you press a key. · Do a quick check of the Touch Ring by sliding your finger around it. All of the ExpressKeys should glow at a brighter level when you touch the ring. · Check the pen by first opening the Pen Tablet control panel and selecting the PEN tab. Click on the DEFAULT button to return the pen to its default settings. Next: Touch the pen tip and then the eraser to the tablet active area. All of the ExpressKeys should glow brightly each time the tip or eraser makes contact with the tablet surface. Without applying pressure to the pen tip, hold the pen tip within approximately 5 mm (0. 20 inch) of the tablet surface and press each pen button in turn. All of the ExpressKeys should glow brightly each time a pen button is pressed C. While still within proximity, but without touching the tablet surface, move your pen across the active area of the tablet. The screen cursor should move in the corresponding direction on your monitor or display screen. When you are done, exit the diagnostics mode by pressing both the upper left and lower right ExpressKeys and holding them down for three (3) seconds. In the Pen Tablet control panel, select the TABLET tab and use the pull-down menus to return the ExpressKeys to their previous settings. · Move your finger in a clockwise direction along the Touch Ring to zoom in on the image. · Move your finger in a counterclockwise direction along the Touch Ring to zoom out of the image. [. . . ] Journal includes a variety of pen, marker, and highlighter tools, plus an eraser that is easily activated by the eraser end of your Bamboo pen. The relationship between your Bamboo pen position on the tablet and the cursor position on the display screen. Modifier keys include SHIFT, ALT, and CTRL for Windows, or SHIFT, CONTROL, COMMAND, and OPTION for Macintosh. You can customize your Bamboo pen or tablet buttons to simulate a modifier key. [. . . ]