User manual WHIRLPOOL AKM903NE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AKM903NE. We hope that this WHIRLPOOL AKM903NE user guide will be useful to you.


WHIRLPOOL AKM903NE : Download the complete user guide (333 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AKM903NE (335 ko)

Manual abstract: user guide WHIRLPOOL AKM903NE

Detailed instructions for use are in the User's Guide.

[. . . ] A pressure cooker allows you to save even more energy and time. BEFORE USING THE COOKING HOB 5 4 • • • To use the hob turn the knob(s) clockwise and position it (them) on the required power setting. The hob is provided with 4 indicator lights showing when the cooking zones are hot. These indicator lights switch on as soon as the cooking zones reach a high temperature. These indicator lights remain on even after switching off the relevant cooking zone and they switch off only when the temperature of the cooking zone is no longer dangerous. Important: To avoid permanently damaging the glass-ceramic top, do not use: - Pots with bottoms that are not perfectly flat - Metal pots with enamelled bottom. Before use, remove: - adhesives stuck on the hob; - cardboard guards and protective plastic film; - check whether the hob has been damaged during transport. [. . . ] • Do not use abrasive products, chlorine-based cleaners, oven-cleaner spray or pan scourers. • The hob should be treated periodically with specific products available from the shops, following the manufacturer's instructions. Telescopic knobs (depending on model) • • The knobs can be lifted approx. - Turn the hob off and on again, to make sure that the problem has been solved. Turn the multi-pole switch to “Off” for a few minutes and then turn it back to “On”. - disconnect the hob immediately from the power supply. TROUBLESHOOTING GUIDE The hob does not work: The hob will not switch off: To get full satisfaction from the hob, please read these instructions carefully and keep them for future consultation. AFTER SALES SERVICE • Before you call the After Sales Service • Make sure that you cannot solve the problem yourself following the points described in chapter “Troubleshooting Guide“. If after the above checks the fault still occurs, get in touch with the nearest After Sales Service. Please give: • a short description of the fault; • the exact type and model of hob; service number (i. e. , the number that follows the word SERVICE on the rating plate under the hob itself). The service number is also indicated on the guarantee booklet; • your full address; • your telephone number. If any repairs are required, please contact an authorised After Sales Service (to guarantee that original spare parts will be used and repairs carried out correctly). Failure to comply with these instructions may compromise the safety and quality of the product. Declaration of conformity • This cooktop has been designed, constructed and marketed in compliance with: - safety objectives of the “Low Voltage” Directive 2006/95/EC (which replaces 73/23/EEC and subsequent amendments). - protection requirements of EEC Directive “EMC” 2004/108. - requirements of EEC Directive 93/68. • • This cooktop is suitable for contact with foodstuffs and complies with EEC (CE) Regulation n. Any other use (such as heating a room) is improper and dangerous. INSTALLATION Recommendations Important: Disconnect the hob from the mains before carrying out any installation work or servicing. • All electrical connections must be made before connecting the appliance to the power supply. • Installation must be carried out by a qualified technician in accordance with the manufacturer's instructions and in compliance with local regulations. • Unpack the hob and make sure that the appliance has not been damaged during transport. 3. Preparing the housing unit Cut the worktop to fit before installing the appliance. Carefully remove any shavings or sawdust that could prevent the appliance from running properly. [. . . ] The installer is responsible for connecting appliances correctly to the mains and for observing the safety regulations. The hob power cable must be long enough to connect the built-in appliance to the mains. Observance of safety directives requires that a multipole switch with a minimum contact gap of 3 mm be used for the installation. After the oven has been installed, the electrical components must be inaccessible. Fig. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AKM903NE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AKM903NE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.